Its 10 PM, Is Toxic Mold Growing in Your Recently Storm Renovated Home ?

NEW JERSEY, N.J. - April 2, 2013 - PRLog -- Mold remediation is a science, many contractors performing mold remediation were not qualified and caused many homeowner indoor air quality problems. Experience and knowledge  of Mold is critical to a proper mold remediation. Fugitive dust generated from removal of building materials such as sheetrock can cause mold problems in areas of the structure not flood by the storm. Mold survives on dust and moisture . If you have both there is good possibility you will have mold. During mold remediation completed by environmental Systems the work areas are isolated from other areas of the house and negative air filtration is used to control dust in addition to other engineering controls. Mold sampling prior to project start and after the project identifies any additional mold problems which can be corrected prior to completion of construction. As stated earlier in this document, mold remediation is a process. It is not a magic spray or a fast remediation. Attention to detail is the most important factor in a mold remediation. Every step of the mold remediation process is important like baking a cake. Miss a step or take short cut and the cake is ruined. Environmental systems can identify mold problems . Our staff of environmental scientists and microbiologists will evaluate a structure and prepare a detailed proposal for evaluation of a structure for mold. Once sample results are obtained from the laboratory and reviewed recommendations for mold remediation can be completed. Environmental  Systems is a full service environmental company and provides mold testing, remediation and construction services. Environmental Systems is licensed by the New Jersey department of Health ( DOH)

To obtain further information regarding our services contact Environmental Systems at 732-892-8707 or visit our web site at depenvirosystems.com.