FoCOM Ford Jaguar Mazda Diagnostic Interface FoCOM OBD Scan Tool

March 6, 2013 - PRLog -- FoCOM is OBD-II Vehicle diagnostic program for Ford Jaguar Mazda vehicles. It can connect to various electronic control units (ECUs) and display identification, read and clear fault code memory, display and record measured values and perform actuator tests.

http://www.obd2motor.com/focom-ford-jaguar-mazda-diagnostic-interface-focom-obd-scan-tool-p-769.html

FoCOM OBD2 Ford ECU Scan Cable

2013 latest version: Focom 1.0.9419 (Support to 2012 cars)

FoCOM is diagnostic program for Ford vehicles. It can connect to various electronic control units (ECUs) and display identification, read and clear fault code memory, display and record measured values and perform actuator tests. FoCOM is diagnostic software for Ford vehicles. Although it was not primarily designed for Mazda and few other brands, it works quite well with these vehicles.

FoCOM Key features:

• Support for wide range of ECUs and models
• Easy connection via smart USB to OBD2 interface
• Wide range of communication protocols and buses covered: J1850 PWM, ISO, CAN
• Automatic ECU recognition
• Automatic vehicle scan
• ECU Identification
• Fault code (DTC) reading
• Fault code clearing
• Measured vaules / live data  
• Live data recording
• Diagnostic protocol printing
• Actuator tests
• Control unit coding
• PATS Immobilizer operations (timed & coded using PATScode.com)
• Flash and serial memory programming functionality will be available in 3Q/2011 in special FoCOM programming edition (flash programming is NOT supported by FoCOM now).
http://www.obd2motor.com/focom-ford-jaguar-mazda-diagnost...
FoCOM Vehicle Coverage:

FoCOM is able to connect to control units on all Ford vehicles 1995-2012. ECU identification, fault code memory reading and clearing works on all control units. Live data is available on all important ECUs in models such as Mondeo, Focus, Fiesta and other. Actuator tests and coding is available for most demanded control units

FoCOM Packing:

1×FoCOM OBD2 USB interface,
1×USB cable,
1×CD-ROM with software and drivers