V1000 (VZA) Inverter Omron – lasting Reliable Drive Control

Dec. 14, 2012 - PRLog -- Compact and sensor-less, the Omron V1000 inverter has all of the features and performance from a world leading inverter drive manufacturer. Easy to install and enable, the V1000 Inverter is also much more compact and comes with a exceptional high degree of reliability.

The Omron V1000 delivers the same high performance for numerous years after its been fitted and installed.
Omron V1000 Inverter Main Features

   Up to 15 kW
   World’s smallest compact inverter
   Built-in filter
   10-years service life
   Control terminal board with memory (Patent pending)
   Faster CPU’s
   Current vector control
   Low-noise technology (Patent pending)
   IM & PM Motor control
   On-line tuning (Patent pending)
   Embedded safety stop function Category 3 (EN954-1)

Omron V1000 Mechanical advances

The Omron V1000 design reduces its volume by 40% compared with previous inverters. In addition, increased vibration resistance from 20Hz to 50Hz (0.6G) and heat dissipation has been greatly increased thanks to a new hybrid heat-sink system.

Performance guaranteed

The Omron V1000 increases output current by around 20% when moving down in frequency carrier thanks to its double rating. The standard setting is heavy duty (HD: 150% rated current/1min) and increasing output current when in normal duty mode (ND: 120% rated current/1 min)

Space-saving side-by-side mounting & Easy Integration

The Omron V1000 Inverters allows easy integration of side-by-side mounting. A special alloy, hybrid cooling fin allows users to mount multiple units close together without overheating problems and saving vast amounts of panel space. The V1000 saves on time and effort with screw-less terminals greatly reducing installation time.

The Omron V1000 comes with a built in EMC filter to save on installation costs and reduce the bill of materials for external parts while simplifying logistics.

Work-saving set-up

With the release of the Omron CX-Drive configuration software, setting up the V1000 inverters is now much easier. Automatic recognition of drive series and type, oscilloscope functions and facilities for connecting a single PC running Configurator to multiple drives are included in the CX-Drive software.

http://www.more-control.com/manufacturers/omron/omron-inv...

Omron’s CX-Drive comes with status indications and alarms to assist with commissioning and fault finding. Drive inputs and outputs can be monitored in real time whilst the oscilloscope function allows detailed analysis of drive operation, without the need for additional test equipment.

Convenient on-line tuning

The Omron V1000 (VZA) has a smart on-line tuning feature that takes auto-tuning a stage further. The continuous method of tuning ensures that any temperature deviation large enough to affect electrical parameters governing the motor speed will be adjusted before any speed variance can occur.

Time-saving safety feature

Safety is embedded in the Omron V1000 from the inside out making it easy to integrate the inverter into machine systems to avoid difficult connections to safety controllers.

Dual safety inputs (acc. To EN954-1 Safety Category 3) will disconnect the motor faster at the first sign of trouble, reducing external wiring and contactors.

Accurate speed control

The Omron V1000 delivers optimum speed control and high starting torque thanks to its current vector control. Current vector control uses a flux current which is an actual measurement rather than an estimated value.

Fast scan cycle

The Omron V1000 employs a dual CPU concept with a CPU device that is four times faster than on board previous inverters. The scan cycle boosts motor control performance, especially in current vector control applications where speed is of essence.

Silent operation

The Omron V1000 Inverter has a noise-suppression function which decreases motor noise at low carrier frequencies. This puts machine operators at less risk to safety hazards.

Minimize downtime

The Omron V1000 has an ingenious pre-maintenance function which calculates the condition of electronic components and advise about replacements based not only on the number of hours in service but also on factors such as stress due to load, temperature, the number of times they have been powered up, output frequency and carrier frequency.

Save repetition

With the V1000, control parameters need only be set once. They are automatically saved to a control terminal board memory which allows the replacement of an inverter without the need of having to re-check functions/parameters etc.

For more information about the Omron V1000 (VZA) Inverter drive, contact More Control on 0345 00 00 400.