Measurement Systems Of Liquids and Gases Pune Launches World's First Special Biogas Mass Flowmeter

Measurement Systems Of Liquids and Gases Recently Launched a Special Type Of Flowmeter Probably The World's First Mass Flowmeter For Biogas Of Its Type Working On The Battery Power and With a Very High Turn Down Ratio.
Spread the Word
Listed Under

Omkar Walambe
Biogas Flowmet


Pune - Maharashtra - India


Sept. 23, 2012 - PRLog -- Measurement Systems Of Liquids and gases  has been faithfully sponsored by the world leaders in Biogas Flow Meters. Please feel free to  browse through through our list of reliable  Clients  for your Biogas Plant Flowmeter Needs to choose The Best You Can
        The Flowmeter Has basic Following Featires which Makes It Probably The worlds First Flowmeter For Measuring The Gases and Specially The Biogas Mass Flow

– Thermal mass measurement principle
– Measuring-, regulation- and alarm function
– Insensitive to pressure and temperature changes
– High accuracy and turndown ratio
– Battery power (2 years of autonomous operation)    or 24 Vdc
– Totalizer
– Extremely compact unit
– CMOS sensor technology
– No moving parts
– Resistant to pressure bumps
– On-the-spot direct reading, including bar graph
– Real gas calibration
– High precision needle valve
– 3-year warranty (except battery)

This Flowmeter is also Backed with a Special Other Features as Below
1.Can Be Manufactured as A OEM Product
2.Very High performance
3.Very High Accuracy
4.Strongest Repeatablity
5.Flowmeter Directly Tested on The Gas The Flowmeter will be Used For
6.Flowmeter withstands High Pressures
7.Easy to Clean so Suitable For Biogas Applications
8.With Special Quick Connectors For Easy Dismantaling and Easy Fast Reinstalliation Of The Flowmeter
9.The Flowmeter Has a High and Wide Turn Down Ratio Of 1:1000 For This Type Of Flowmeter
10.The Flowmeter Is Backed with a 3 Yrs Special Warranty as we are Very Confident About The Product Quality
11.Cost Effective Solution to Measure Various Gases All In One Flowmeter.
12.High Temperature withstablity if to Be Used Specially Upto 200 Degrees
13.Digital Display with Optional 4-20 mA Retransmission outputs(Available On Speicial Requests and is a Loop One)
14.End Connections as required Customisable
15.Manufactured with all Stainless Steel 316L or Minimum Stainless Steel 304 to Make it  Withstand The Harshest Environment Available.

Performance data and Detailed Flowmeter Technical Overview
Media   Air, O2, N2, He, Ar, CO2, H2, CH4, C3H8
Other gases and gasmixtures on request
Accuracy(air & equivalents)   Eco: ± 2.0% of FS; ranges >200 ln/min ± 3.0% of FS
Special:   ± 1.0% of FS up to 50 ln/min
Response time   from 500 ms (depending on the application)
Repeatability   ± 1% of full scale
Longterm stability   < 1% of measured value / year
Power supply Meter & Regulator
Lithium battery (Lifetime about 2 years with constant flow)
Option: External supply + 24 Vdc ± 10% or
Power Supply Device 230 Vac / 24Vdc
Power supply Switch & All-in
External supply + 24 Vdc ± 10% or
Power Supply Device 230 Vac / 24Vdc
Pressure   0.2 – 11 bar a
Temperature   0 – 50°C
Materials   Anodized aluminium, optional stainless steel electropolished
Seals   FKM, optional EPDM
Pressure sensitivity   < 0.2% / bar of reading (typical N2)
Temperature sensitivity   < 0.025% FS measuring range type / °C
   Measuring Ranges   Type   Full Scale   Connection
   Full scale freely selectable   A3   100 mln/min   G1/4"
       A4   200 mln/min   G1/4"
       A5   500 mln/min   G1/4"
       B3   1000 mln/min   G1/4"
       B4   2000 mln/min   G1/4"
       B5   5000 mln/min   G1/4"
       C3   10 ln/min   G1/4"
       C4   20 ln/min   G1/4"
       C5   50 ln/min   G1/4"
       D3   100 ln/min   G1/2"
       D4   450 ln/min   G1/2"
   Integration   Display   6-digit LCD in engineering units and bar graph
       Process connection   G¼“ female less than 60 ln/min, G½“ female less than 450 ln/min
       Inlet section   None required
       Mounting orientation   Any orientation (horizontal only above 5 bar)
   Safety   Test pressure   16 bar a
       Leak rate   < 1 x 10-6 mbar l/s He
       Environ. protection   IP-50, but front plate IP-65 if panel mounted
       EMC   EN 61326-1
   Optional Flow switch   Settings   
       Function   Min. or max. alarm
       Threshold   Between 0 and FS freely adjustable, normally open or closed
       Fail-safe mode   Can be activated
       Alarm delay   Adjustable 0 – 180 s
       Alarm hysteresi   Freely adjustable
       Alarm suppression   Can be activated
       Alarm reset   Automatic or manual
       Contact   Floating changeover contact (24 V, 1 A

Biogas Flowmeters for Biogas Production

With the major companies around the world looking for opportunities to get involved in new ways to generate electrical power by renewable energy, the thermal mass meter now comes into the spotlight. Companies involved in biogas production are turning to gas mass meters for reliable process monitoring. The thermal mass meter is not only important for internal auditing purposes to gather information on the relative success of the biogas process but also crucial to companies who need accurate and reliable process gas flow metering instruments to pass an audit which is normally part of the criterion for gaining carbon credits.
                                            Offering the correct flow technology capable of maintaining required accuracy and repeatability for mass gas flow in Biogas plants has become more important in the last few years.  The biogas plant not only needs the above but also needs reliable manufacturers who can support sales, delivery and service since there will be several measurement applications critical to monitoring and this monitoring and demand can be high if several projects are going to be implemented concurrently.
                       Renewable Energy Consultants and Contractors chose Thermal Mass

Biogas can vary in composition and requires gas flow instrumentation capable of handling a high dynamic measuring range. Not only must the flow meter have an ability to handle moisture but it also needs to be economically priced.

Flow calibration is also important to anyone who is looking for standards and traceability. Companies who have a long history and experience in manufacturing of highly reproducible , wide gas list options and user friendly thermal mass meters are leading the way and becoming the flow instrument of choice for Biogas Plants.

We also Recenlty Released A Flowmeter For Venturi With Many Similar Features which will be Published Shortly

Pls Do Visit Our  Blogs For The Recent and Regular Blogs For Measurement Systems Of Liquids and Gases

You Can also Visit : www.measurementsystemsofliquidsgases,com or for many more products full with innovations

Also You Can Get Connected with Us at
Source:Measurement Systems Of Liquids and Gases Pune
Email:*** Email Verified
Tags:Biogas-Flowmeter, Omkar Walambe, Mass-Flow-Measurements-Of-Liquids, Biogas Flowmet
Industry:Biotech, Manufacturing
Location:Pune - Maharashtra - India
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse

Like PRLog?
Click to Share