Used Lubricant Oil Cleaning/ Hudraulic Oil Recondition/ gear oil purifying

Is there a preferred method for removing water from oil in a lube or hydraulic circulating system? How much water can be removed by these methods?"
By: waste oil management plant
 
July 4, 2012 - PRLog -- Water in any lubrication system is bad news. In hydraulic systems, it can result in vaporous pump cavitation, corrosion and valve stiction, while in circulating lube oil systems it can cause oil film strength loss, rusting and other serious mechanical problems.

The effects of water on the oil are often overlooked. Excessive water contamination can result in premature oil oxidation and promote the buildup of sludge and varnish. In ester-based fluids, it can result in the hydrolytic destruction of the base fluid resulting in the formation of corrosive acids. In some circumstances, water can also strip additives from the oil through water washing or hydrolysis resulting in premature oil degradation.

For these reasons, the best strategy when it comes to water is to monitor and control the root cause of the water ingression. This can be achieved by ensuring that all seal and breathers are in good shape (consider using desiccant style breathers), lube tank hatches are closed and sealed properly and that top-up oil is stored and handled properly.

Water can exist in three phases in an oil, free, emulsified and dissolved. Free and emulsified water cause the most damage so a good rule of thumb is to keep moisture levels below the saturation point so that all the water is in the dissolved state. For typical mineral-based industrial oils, this is typically 200-300 ppm.

The most effective way of achieving this is to use a vacuum dehydration unit. These systems are capable of removing free and emulsified water as well as up to 70-80% of the dissolved water. For a typical hydraulic fluid, this can mean water levels as low as 30-50 ppm (0.003-0.005%). Alternatively, many companies are reporting success with vapor extraction devices mounting on tank tops. Some of these devices work similar to air conditioners in removing humid air from tank headspaces.

please contact us freely for more info,we'll reply you no more than one day
Skype: Joanna15023
Email:oilpurifier.joanna@zhongnengcq.cn
MSN: Joanna1987@hotmail.com
yahoo:oilfiltration7@yahoo.com
tel:0086-23-68681154
Mob:+86 13983126457
WEB:http://best-purifier.diytrade.com
web: www.zhongnengcq.com
End
Source:waste oil management plant
Email:***@hotmail.com
Zip:400039
Tags:Lubricant Oil Purifier, Hydraulic Oil Treatment, Oil Dehydrator
Industry:oil saving
Location:Chongqing - Chongqing - China
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
Trending
Most Viewed
Daily News



Like PRLog?
9K2K1K
Click to Share