LCD Three Phase Multi-function Power Ananlyse Meter MPM8000

April 5, 2012 - PRLog -- 1.1 Profile
MPM8000 is a powerful multifunction power meter with modular design, which can be applied for monitoring and controlling of the electrical system. MPM8000 can measure and analyze real time data, such as U, I, P, Q, S, COSΦ, F, kWh, kVAr, etc. MPM8000 has the following functions: RS-485 communication port, 2 energy pulse output (include active energy and reactive energy), Max/min data record, and SOE event record. MPM8000 can extend functions by choosing the external optional modules: harmonic analysis, 8 remote signals on/off mode, programmable 4 analog outputs (0~5V or 4~20mA optional), data storage, Profibus Com. protocol, Ethernet communication functions. The multi-tariff function allows the user to measure energy in any interval (the min. interval is 30min.), which can read the sum, sharp, peak, valley, flat energy data in 30 days, and measure 2nd to 63rd harmonics in statistics.
All our instruments fulfill all important requirements and regulations concerning electromagnetic compatibility and safety isolation (IEC61000, IEC1010 standard and EN61010 standard). The devices have been developed, manufactured and tested in accordance with Quality Assurance System ISO 9001.

1.2 Measured Scope
The meter MPM8000 can be applied in single phase, 3-Ph 3Wire, 3-Ph 4Wire system. It can be applied vastly in the field of secondary measurement in high Voltage, low Voltage system, or transmission of measured data.

1.3 Parameters
Input Current
Input Current:  5A    (Current value can be set up)
Measurement scope: 0.5%~120%
Overload capacity: 2 X rated continuously, 100A/1s non continuously
Power consumption: ≤0.2VA per phase
Voltage Input
Input Voltage: 400VAC  (L-N), 693VAC (L-L) (Voltage value can be set up)
System frequency: 45~65Hz
Measurement scope: 3%~120%
Overload Capacity: 2 X rated continuous, 2500V/1s non continuous
Power consumption: ≤0.5VA per phase
Switch Status (Optional)
Input Channels: 8 channels
Input Type: Dry contact
Isolated Voltage: 2500VAC
Relay Output (optional)
Output Channels: 4 channels programmable
Output Type: Mechanic contact, constant on output
Contact Capacity: 5A/250VAC
Analog output (optional)
No. of outputs: 4 channels programmable
Output signal: 4~20mA or 0~5V
Response time: ≤400ms
Pulse output (standard)
No. of outputs: 2 channels (active/reactive energy each)
Serial com. port (standard)
NO. of outputs: 1 RS-485 port
Communication protocol: Modbus-RTU protocol
Baud rate: 2400/4800/9600/19200/38400bps
Profibus com. module (optional)
No. of channels: 1
Communication protocol: Profibus-DP protocol
Ethernet networking module (optional)
No. of channels: 1chanel 10M/100M adaptive
Communication Protocol: TCP/IP protocol

If you have interesting or if you have any question, please contact linda
Email: export008@szhyes.com, MSN: szhyes301@hotmail.com, Skype: szhyes

# # #

Our products include smart power distribution systems, power quality monitoring and analysis management system, temperature, humidity and vibration monitoring and management system, wireless vibration measurement system, online power quality analyzer, smart low voltage motor protection controller, electricity transmitter, electronic active / reactive energy meter, the motor re-start controllers and so on. Integrating R&D, product design and sales, we can offer OEM and ODM service.