RONETIX’s JTAG/BDM/SWD Emulator and Flash Programmer now supports also Freescale QorIQ based CPUs

Ronetix announced today the availability of the new firmware of its high speed JTAG/BDM/SWD Emulator and Flash Programmer. The new firmware adds support debugging and FLASH programming of the Freescale QorIQ family.
By: RONETIX
 
 
PEEDI
PEEDI
 
Spread the Word
Listed Under

Tags:
Jtag
Swd
Bdm
Gdb
Arm
Debug
Cortex
Xscale
P1010
P1020
P2040
P4080
MPC55XX
MPC56X
MPC83XX
MPC85XX
OMAP4430

Industrys:
Technology
Electronics
Industrial

Location:
Vienna - Vienna - Austria

Subject:
Products

March 28, 2012 - PRLog -- Vienna, Austria – March 28, 2012 – Ronetix announced today the availability of the new firmware of its high speed JTAG/BDM/SWD Emulator and Flash Programmer. The new firmware adds support debugging and FLASH programming of the Freescale QorIQ family  (P1010, P1020, P2040, P4080, etc.).

Now PEEDI can be used for high speed GNU gdb debugging and Flash Programming of all ARM7, ARM9, ARM11, Cortex-M0/M3, Cortex-A5/A8/A9, XScale, Freescale Nexus enabled Qoriwa MPC55XX, MPC56XX, MPC51XX, MPC52XX, MPC83XX, MPC85XX, ColdFire, Blackfin, MIPS32 and AVR32 based CPUs.

Because of its built-in GNU gdb support, PEEDI can be used with any GNU gdb based debugger Eclipse, without any additional software, which makes PEEDI host operating system independent.

The built-in Flash Programmer of PEEDI supports programming of over 1000 NOR Flash chips, 8-bit and 16-bit NAND Flash, SPI and I2C FLASH/EEPROM, SD/MMC/eMMC devices connected to the CPU.

PEEDI supports also programming of the internal Flash memory of Actel A2F, Analog Aduc7, Atmel AVR32UC3, AT91SAM3, AT91SAM7, AT91SAM9, EnergyMicro EFM32, Freescale Kinetis, MAC7000, ColdFire MCF, Qoriwa MPC, Microchip PIC32, ST STM32, STR7, STR9, TI TMS470, Luminary/TI LM3S, NXP LPC, family.

PEEDI supports several flash profiles, which enables the programming of a complete Linux system at once: U-BOOT, Linux Kernel and JFFS2/YAFFS/UBIFS root file system.

Among the advantages of PEEDI are:

Multi core support - up to 4 cores
Built-in support for gdb (remote target via Ethernet).
Very high real download speed – up to 1.25 Mbytes/s.
5 kHz – 33MHz JTAG/BDM clock using 35cm standard cable.
Automatic measuring and compensating of delays in the JTAG signals
Target Voltage 1.2V – 5V.
Built-in telnet command line interface.
Built-in very fast Flash programmer that supports over 900 Flash devices.
Can be used as a standalone Flash Programmer, up to 15 images can be stored on MMC/SD card, controlled by front panel interface.
Small robust aluminum case.
DCC over TCP support.
OS awareness.
GDB FLASH programming.
End
Email:***@ronetix.at Email Verified
Zip:1140
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse



Like PRLog?
9K2K1K
Click to Share