PE Jaw Crusher can crush many different ores and rocks

PE Jaw Crusher can crush many different ores and rocks whose compression strength between 147 to 245 Mpa to coarse, medium, and fine crushing. It is the biggest broken equipment.
By: jacker
 
March 14, 2012 - PRLog -- PE Jaw Crusher can crush many different ores and rocks whose compression strength between 147 to 245 Mpa to coarse, medium, and fine crushing. It is the biggest broken equipment. Among all the parts, jaw is the main venerable one, so it has a large consumption. DSMAC pay attention to analyze and research the working conditions of these parts that easy to be damaged, only in this way, can we choose materials and processing technology in a reasonable way, can we supply the best PE Jaw Crushers to our clients.
   Jaw Plates
   The analysis of Jaw crusher’s working principle. The upper part of movable jaw plate combines with eccentric shaft, and the lower part is supported by thrust plate, however, fixed jaw plate is bounded on machine frame. When the eccentric moving, movable jaw plate is pressed by materials, and fixed jaw plate is mainly exposed to the material sliding cutting action. Through failure analysis, we conclude that blocking the damage mechanism of jaw is that the repeated extrusion comes from the materials to jaw can cause abrasion, and the short-range sliding comes from materials can lead to wear and tear. In order to improve the usage of jaw, we should mainly consider the hardness and toughness of materials. If the materials have high hardness, the depth of jaw pressed into jaw is shallow,so that the surface deformation is small. At the same time, the amount of abrasive sliding comes from materials is small. Besides, materials should have a certain toughness,so that can prevent the occurrence of fracture during the extrusion process to make sure the normal usage of jaw.
  Jaw plates materials
   The high-manganese steel is the traditional material of the jaw crusher. It has good shock load capability, but because of unreasonable structures of crusher, the angle between the fixed jaw plate and movable jaw plate is too large, which is easy to cause materials’ sliding. Low surface hardness is due to strain hardening is not fully leaving the jaw, the materials short-cutting leads to the damage of jaw. In order to improve the usage of jaw, we delve into many kinds of materials for jaw, such as Cr、MoW、Ti、V、Nband so on, which can disperse strengthening treatment of high-manganese steel,and improve Its initial hardness and yield strength.we also developed manganese steel Bu, low-magic III, high chromium cast iron and high manganese steel composite, ADI of Qu iron and so on,and all of them make good effect in production.
   Commercial chromium rely iron has high wear resistance,however, because of the toughness is poor , so high chromium cast iron jaw is not necessarily made good effect. In recent years, we use  high chromium cast iron cast-bonding in high-manganese steel jaw plate to form a complex jaw, whose relative density tolerance is up to three times more, which made the usage of jaw improved highly. This way is also a effective one to improve the life of jaw, but the process is very complex, so it is difficult to complete.
   Middle carbon low-alloy cast steel is also a wear-resistant materials,because it has High hardness (≥ 45HRC) (a ≥ 15J/cm) matched with the appropriate toughness, the material can resist cutting and repeated extrusion caused by fatigue sapling, so it has good wear resistance. Besides, middle carbon in low alloy cast steel through the adjustment of the composition and heat treatment process, which can make the toughness and hardness change in a large range, so that can meet different production conditions. It contains 0.4~0.8C、0.7~1.3Si、0.7~1.1Mn、1.5~2.5Cr、0.4~0.6Ni、0.3~0.7Mo. The life of the low carbon alloy steel jaw plates high manganese steel can be increased by more than three times
   DSMAC has PE Jaw crusher and other crushers, which use the advanced international crusher technology,manufacturing level, and quality of material. We have sold thousands of machines around the world, which received the good evaluation from our clients, welcome to call us and communicate with us.
http://www.jawcrusher-china.com
http://www.stonecrusher.in

# # #

Our company can product hammer crusher,impact crusher,jaw crusher and other crushing machine or spare parts
End
Source:jacker
Email:***@hotmail.com
Zip:450001
Tags:Jaw Crusher, Jaw Crushing Plant, Jaw Crushing Machine
Industry:Business
Location:zhengzhou - Henan - China
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
Trending News
Most Viewed
Top Daily News



Like PRLog?
9K2K1K
Click to Share