The Proper Use Of a Fire Extinquisher Provided by SOS Fire Services, Winnetka, CA

Feb. 3, 2012 - PRLog -- The operating instructions for fire extinguishers are clearly noted on the extinguisher label, and in the Owner's Manual that came with the extinguisher. But, SOS Fire Services in Winnetka, Ca wants you to be prepared.

Note: The following instructions are of a general nature, intended to familiarize the user with the basic operating techniques of hand portable extinguishers. All operate by removing the ring (safety) pin and squeezing the handles together. Since extinguishers differ, the extinguisher nameplate must be consulted for specific procedures and starting distances.

1. HOLD THE EXTINGUISHER UPRIGHT AND PULL THE RING (SAFETY) PIN breaking the plastic seal.
2. STAND BACK FROM THE FIRE (the minimum distance stated on the nameplate) and AIM AT THE BASE OF THE FIRE NEAREST YOU.
3. Keeping the extinguisher UPRIGHT, SQUEEZE THE HANDLES TOGETHER to discharge and SWEEP FROM SIDE TO SIDE. Move closer as the fire is extinguished but not so close as to scatter the burning material or liquid.
4. When the fire is out, back away while watching for possible re-ignition.

5. Evacuate and ventilate the area immediately after use. The fumes and smoke from any fire may be hazardous and can be deadly.

REMEMBER THIS SIMPLE WORD: PASS
•   PULL
•   AIM
•   SQUEEZE
•   SWEEP
Note: What to do After Use: Once the fire extinguisher has been used you should replace it or have it serviced and refilled as soon as possible to be properly prepared in the event of another fire.
Any Questions? Call us 818-921-7757 or visit our website http://sosfireservices.com

# # #

Fire Protection Services: Our specialty is installation, maintenance and services of all type Fire Extinguishers as well as Fire Extinguishing Systems for protection of restaurants cooking area-UL300.