Brass Pipe Fittings launches Flexible entry boots and Fittings

Jan. 27, 2012 - PRLog -- Brass Pipe Fittings is a Jamnagar India based manufacturer and exporter of Brass pipe fittings Brass plumbing fittings hose couplings etc.They have recently launched a new range of flexible entry boots and fittings for composite hoses for the European market.

Brass Pipe Fittings made Flexible Entry Boots are  reliable, safe seals for pipe and conduit entries into underground containment sumps.These entry boots allow for angled pipe entries and have no  exposed metal parts to the underground environment.These entry boots are  available in a variety of sizes and  designs to accommodate rigid and
flexible piping, ducting and access pipe.

Angled Entries:  

Primary pipe and access pipe entering the containment sumps may not be perpendicular with the sump wall. Angled entries are generally a result of directional plumbing restrictions on the inside of the containment chamber due to space limitations. Flexible entry boots are flexible enough to permit angled pipe or conduit entries (on two axes) into the sidewall of a containment chamber. All flexible entry boots permit angled entries up to a 15-degree angle off the perpendicular center line in any direction without leaking or putting undue stress on the pipe or conduit seal.

Specifications:
Specifications for  Single Flexible Entry Boot and Fitting

STF -0751 1/2", 3/4" and 1" Conduit Entry Boot Fitting 2-3/8" 6.03
STF-0150 1.5" Entry Boot Fitting for 1.5" DW FlexWorks Pipe 3-3/4" 9.52
STF-0200 2" Entry Boot Fitting for 2" DW FlexWorks Pipe or 2" LCX 3-3/4" 9.52
STFF-0200F 2" Entry Boot Fitting for 2" Rigid Pipe 3-3/4" 9.52
STFF-0300 3" Entry Boot Fitting for 3" DW FlexWorks Pipe or
3" Rigid Pipe/LCX 5" 12.7
STF-0400 4" Entry Boot Fitting for 4" Rigid Pipe/AXP Pipe 5-1/2" 13.97
STF-0600 6" Entry Boot Fitting for 6" Rigid Pipe Saber Saw
STF -7400 4" Sump Access Boot 5" 12.7

Sump Entry:
Flexible entry boots have been tested  to withstand a minimum of 6' of liquid  head pressure.These seals provide a studded flange connection to create a positive and secure seal where the  rubber contacts the sump wall and also around the pipe or conduit.Tightening  down on a series of stud fasteners with  a compression ring provides a high compression mechanical seal compared  to screw on type bulkhead seals.

Apart from above mentioned products Brass pipe fittings also offers Brass hose barbs, Brass tank connectors, Brass anchors,Brass fasteners, Brass inserts, Bronze fittings,Brass Bushes,Brass Plugs,Brass Sockets,Brass Tees/Elbows,Pipe Nipples,Brass Screws,Stainless steel hose barbs,Brass Nuts,Brass Parts,compression Fittings,Plumbling Fittings,Bronze Fittings etc.

You may visit their site at http://www.brass-pipe-fittings.com and for products http://www.brass-pipe-fittings.com/products.html and http://www.brass-pipe-fittings.com/resources.html for more details.