Halo LED H7 Housing and Retrofit Compatibility

Whether you are building new construction or have an existing space with recessed housings already installed, you can start saving money and energy by switching to LED lighting.
 
 
Spread the Word
Listed Under

Tags:
Halo LED Lighting
Recessed Lighting
Energy Saving

Industry:
• Lighting

Location:
US

Nov. 14, 2011 - PRLog -- New Construction and Remodel Housings with Torsion Spring Receivers

Installation Features

Whether you are building new construction or have an existing space with recessed housings already installed, you can start saving money and energy by switching
to LED lighting. For new construction, use a dedicated Halo LED H750 series housing that is already wired to accept the Halo LED Module. For existing housings, the LED Modules can be easily installed with the Edison Base Adapter (included) - no special
tools or rewiring needed. The Halo LED Module is designed to fit into dedicated Halo LED housings, existing Halo or All-Pro housings, or other existing 6˝ compatible aperture housings. If used in recessed housings other than Halo or All-Pro the Cooper
Lighting 3-year warranty applies to the LED Module and Trim only. As with any electrical installation, a qualified electrician must ensure compatibility of use with a particular housing; this includes all applicable national and local electrical and building
codes. Installer is responsible to properly retain the LED Module and Trim in a housing at time of installation. For retrofit of housings with torsion spring brackets the housing must accommodate torsion springs and provide space for the Module to fit. For housings without torsion spring brackets the ML7RAB retrofit adaptor band is available.

To purchase Halo H7 LED Module, click http://www.electricsuppliesonline.com/halo-recessed-light...

To purchase Halo H7 LED Housing, click http://www.electricsuppliesonline.com/halo-recessed-light...

To purchase Halo H7 LED Trim, click http://www.electricsuppliesonline.com/halo-recessed-light...

Halo LED Module

• Retrofits existing Halo and All-Pro housings
- Halo H7x family
- All-Pro ET7x and EI7x family
• Retrofits into Non-Halo housings Too!
• Reduce energy and A/C costs by retrofiting existing 6˝ recessed incandescent downlights to Halo LED.
• Many 6˝ aperture recessed downlights are retrofit-ready with torsion spring receivers.
• Halo LED Module carries UL Classified listings for direct retrofit into the following 6˝
downlights that have torsion spring receivers:
- Capri CR1
- Capri PR1
- Capri QL1
- Juno IC22
- Lithonia L7X
- Thomas PS1
- Elco EL7ICA
End
Source:
Email:***@electricsuppliesonline.com Email Verified
Tags:Halo LED Lighting, Recessed Lighting, Energy Saving
Industry:Lighting
Location:United States
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
Electricsuppliesonline PRs
Trending News
Top Daily News
Top Weekly News



Like PRLog?
9K2K1K
Click to Share