Acoustiblok® and QuietFiber® Layered to Quiet Residential Generator in Weekend DIY Project
Acoustifence and QuietFiber are combined in a weekend DIY soundproofing project for a Maryland homeowner looking to quiet his backyard emergency generator.
By: Liz Ernst, director of public relations
Rachlin, an investment banker and self-proclaimed “slightly handy” do-it-yourselfer purchased the emergency generator to insure power during Montgomery County’s notorious power outages that can last anywhere from a few hours to a few days.
After moving into his newly built house in a densely populated subdivision, Rachlin decided that installing the generator was a necessity, but the noise levels from the brand new unit were registering much higher than the manufacturer’
Using a decibel reader, Rachlin measured normal levels, without the generator on, at 50-decibels (which included ambient noise from neighbors’ HVAC units and other normal background sounds), and between 78- and 80-decibels with the generator running.
“I decided to do something about soundproofing the unit before the neighbors had a chance to complain,” Rachlin said. “I wanted to create a low-sound environment for my neighbors and my family.
“I also was concerned that the generator was exceeding Montgomery County’s fairly strict noise ordinances.”
Rachlin began by building an enclosure using pressure treated lumber that matched his property’s perimeter fence to maintain the nicely appointed atmosphere of his yard and patio area. Once built, he lined the enclosure first with (1/8-inch) Acoustiblok noise deadening material, and topped it with QuietFiber QuietFiber noise absorbing material. Rachlin said he had researched soundproofing options extensively before singling out Acoustiblok over three other similar companies. (Acoustiblok’
With installation guidance provided by Paul Getts, a sound consultant with Acoustiblok, Inc., Rachlin was able to attach the Acoustiblok to the wood surface using small screws with ½-inch washers to, which provided the sound blocking measure he needed. He followed up by attaching QuietFiber on top of the Acoustiblok to add a level of noise absorption to the project.
“It took three days and many gallons of water to keep me hydrated, because we’ve had record heat levels up here this summer,” Rachlin said. “But I was able to complete the entire project myself in one weekend, which made my wife very happy.”
Rachlin measured the results of the enclosure after the soundproofing application was complete, and said the result was a noise reduction of more than 10-decibels, which translated to more than 50-percent reduction in perceived sound. Since the unit needs to remain open on one side to prevent obstruction to the air-cooled engine, which he accomplished with ventilating latticework at the base of the enclosure, he is considering adding an Acoustiblok-
“Montgomery County has an infrastructure that dates back to the 1930’s and is all above ground,” Rachlin said. “We are extremely susceptible to power outages, and have lost one too many freezers filled with meat, and spent more than enough hot Maryland summer days with no air conditioning when the power went out.
“When we built this house, we knew that we had to have a generator in place. The final step was making it quiet enough to be good neighbors, keep the noise ordinance officials happy, and enjoy having power when we need it.”
“Generator noise is a growing problem everywhere, especially in residential neighborhoods, where multiple units can be running at once after a storm or power outage,” said Lahnie Johnson, founder and president of Acoustiblok, Inc. “This is the type of noise that contributes to noise pollution and the health risks that go along with it. People are becoming more proactive about creating a quiet environment, especially at home.
“Mr. Rachlin’s project represents just one of the ingenious ways ordinary homeowners can take on a soundproofing project themselves and make it into a satisfying DIY weekend project. We are proud of our innovative noise deadening products that people can work with to achieve soundproofing at home without the need to hire contractors or installation experts.”
Acoustiblok sound reduction material is made of a 1/8-inch (3 mm) thick proprietary viscoelastic polymer material with a high-density, non-barium mineral content, heavy yet extremely flexible. It is easily cut to fit with a box cutter, which makes it customizable to fit around pipes and other fixtures. Just one thin layer of Acoustiblok added to a standard metal or wood stud wall will result in more sound reduction - and provide more privacy - than 12-inches (30.5 cm) of poured concrete.
Unlike fiberglass, QuietFiber is not only UV tolerant, but also totally hydrophobic (will not absorb water or moisture), and specifically designed for maximum (NRC 1.00) noise absorption. In addition, it will not support mold or mildew, and can work in temperatures above 1800-degrees. QuietFiber is UL fire rated for floor, wall and ceiling applications, and like all Acoustiblok products, 100-percent recyclable and 100-percent made in the U.S.
For more information or to view a video of Acoustiblok’
# # #
Acoustiblok sound proofing dramatically reduces sound disturbances in homes, condos, hotels, hospitals, institutional & office buildings around the world. This major reduction in noise transmission provides significantly increased privacy and solitude.