Follow on Google News News By Tag Industry News News By Place Country(s) Industry News
Follow on Google News | AIJU compares the plastic processing properties on an industrial and laboratory scaleThe RDT undertakes the comparative study of tensile mechanical properties of plastic materials processed on an industrial and laboratory scale
By: Miguel A. León - AIJU Nevertheless, these nanoparticles can be especially expensive, ranging from 100€ Kg up to 5000€ Kg for the most specialised, with the machinery transformation sector evolving in parallel. That is why the Toy Research Institute (AIJU) has complemented the working line for the development of new materials with micro-extrusion and mini-injection equipment to achieve the mechanical characterization of new formulations. Within the framework of this study, tensile tests have been carried out on test specimens, both with and without added materials. Miguel A. León, the technical manager in AIJU for this study explains that: “The tensile properties have been studied which are the most important indicators of the material resistance, in which both, the strength required to pull the test specimen as well as the enlargement during the whole test are registered.” Within the study, the conclusion reached was that injection moulding of thermoplastic materials on a laboratory scale reproduces the same results obtained on an industrial scale, thus being a valid alternative in the case of having a low amount of raw material or that these materials have a high cost, as would be the case with nanoadditives or nanocharges. Another notable aspect of this study is that the standard test specimen is not a critical factor, according to the results obtained in the tensile tests for both, test specimen type 1A as well as test specimen type 1BA. These results have been obtained thanks to the financial support of the Conselleria de Industria Comercio e Innovación and the MITYC through the financing of projects INIDIV/2010/ # # # The Toy Research Institute (AIJU) is a non-profit making organisation, located in Ibi, the Spanish geographic centre for the manufacture of toys. It was founded in 1985. Its aim is to transfer and allow toy manufacturers access to the knowledge of new technologies in order to improve their competitivity, while offering technological and financial assessment and supporting the professional development of people involved in the sector. For this purpose, it has a staff of 75 professionals and the required infrastructure to manage the different activities it undertakes. The department intended to carry out these tasks is that of Product Development – Laboratory Department, specifically the Processing and Materials area. This area has several research lines for the development of new materials both, for traditional technologies and rapid manufacturing technologies, working closely with the Rapid Manufacturing area. It is a notified body in the EU in accordance to Toy safety Directive. End
Account Email Address Disclaimer Report Abuse
|
|