Custom Magnets From Canadian Company Shares More Information

April 27, 2011 - PRLog -- The majority of people do not have any concept about what is feasible with Electro Magnet, and we really are talking about the range of effects.

Like so many other things, you have to evaluate what you are working with and weigh them against each other. If you mistakenly overlook something, the outcomes can be unpleasant, to say the least. It is only after looking at all that is on the table will you be in a solid position to make your move.

Alnico magnets can be made from a variety of materials such as cobalt, nickel, aluminum and sometimes even titanium and copper. A hard and brittle material, Alnico is known for sometimes being difficult to rework. Rods, rings, discs, blocks, cylinders and horseshoes are just a few of the shapes that alnico can be manufactured in.

Casting and sintering are the most common ways to manufacture alnico magnets, which have high energies and high residual inductions. Processes where molten metal alloy is poured into a mold and processed through various heat-treated cycles is known as the casting process. Manufacturing magnets through sintering is a process where two main materials are combined and melted down until where they stick to each other.

Sintering alnico results in a fine alnico powder that is then compacted in a press. There are many benefits to using alnico magnets, including their ability to resist extremely high temperatures, the fact that they maintain their magnet qualities for long periods of time, their strength and their affordability. Overall, alnico magnets are a good choice for a variety of industrial and consumer applications..

Of all the magnets available ceramic ferrite magnets are one of the most popular types produced, and are often referred to as ceramic magnets or ferrite magnets. Contributing to the popularity of ferrite magnets is their affordability and ability to maintain their magnetic qualities for long periods of time.

The materials required to manufacture ceramic ferrite magnets are easily available at low costs, and these magnets keep their magnetic qualities for a long period of time (which is why they are known as a permanent magnet), making them ideal to be used in a number of industries, at work, at home and in your garage or shop.

A chemical compound that contains iron oxide and ceramic is the major composition for a ceramic ferrite magnet. Ceramic ferrite magnets are made by sintering and pressing mixtures of magnetic powders and ceramic.

Ceramic magnets are described as brittle and hard. Sintering is a method that is used to make objects from powder. The sintering process is completed by heating the materials in a furnace (but not to their melting point) until the particles of powder stick to each other.. designs is an area that is just filled with helpful details, as you just have read. As always, though, much of what you decide you need is totally dependent on what you want to achieve.

Even though it is important to every person concerned, there are important variables you should keep in mind. Exactly how they effect what you do is something you need to carefully consider. But let's keep going due to the fact we have some exceptional tips for you to give serious attention.

One of the rare earth magnets is neodymium, which is made from neodymium which is a chemical element with atomic number 60 and symbol Nd. Neodymium easily tarnishes in the air and is a silvery, soft metal present in the ore minerals bastnasite and monazite. Neodymium magnets are preferred for certain applications because of their strength and ability to perform in extreme conditions.

Consider neodymium magnets in situations where you need to use maximum energy and work in service temperatures up to 150 degrees Celsius. Neodymium are preferred over ferrite or alnico magnets in certain applications because they are much stronger. There are many advantages to using neodymium magnets and products made from neodymium.

Despite its strength, affordability and popularity neodymium does have a couple of drawbacks. With a lower Curie temperature than samarium-cobalt (another rare earth magnet), neodymium cannot resist excessively high temperatures, and could lose its magnetism if placed in an environment with a temperature that is too hot. Neodymium performs extremely well in very cold temperatures.

Neodymium is less durable and more prone to scratching than other rare earth magnets because it is less resistant to oxidation, which means that it must have treatments applied in order to protect it. In order to protect neodymium magnets from cracks and corrosion often manufacturers will apply surface treatments in the form of plating or coating in the form of nickel, tin, zinc or gold. Neodymium magnets can be improved through the application of a good plating or coating which will minimize cracks and the process of oxidization..

A powerful type of magnetic strip is a high energy strip magnet which has a nitrile rubber base. MGOe (megagaussoersteds) is a measurement of the amount of magnetic energy stored in a magnet. More powerful than normal flexible magnetic strips, high energy strip magnets come in 1.1 - 1.6 MGOe.

These magnetic strips come in a variety of sizes and shapes, have adhesive backing and are often laminated. Ideal for laminating and punching, flexible magnetic strips can be cut to length, are available in a number of sizes and widths and will stick to any ferrous surface. Magnetic tape has a variety of uses in school, work and around the home. Magnetic tape can be used for many different purposes.

The front of magnetic tape has an adhesive and the back has a magnet. Magnetic tape can be used for a number of different applications because it is so affordable, thin, flexible and versatile.

Block magnets are durable and are a good choice for industrial settings. Depending on the need the composition of your block magnet will differ, which is why you must consider the conditions and purpose for the magnet before you make a decision.

A rare earth magnet like neodymium or samarium-cobalt is stronger than alnico and ceramic magnets, which means they will work well in industrial or heavy duty applications. In addition to the strength of the magnet you need to consider the temperature and keep in mind that some magnets lose or maintain magnetism at different temperatures.

The type of magnet you will use will depend on your needs, but keep in mind how easy or difficult it is to demagnetize the magnet when you make your decision. In a moment, you will be able to discover something that I think can make all the difference when you are searching for custom magnet. Research is time intensive and hard, but we think we have come across the very best as you will soon discover. It is just that people make honest slipups because they are misinformed, but we can help you avoid that pitfall, altogether.

Check this information about:
http://www.jobmastermagnets.com/custom-magnets.aspx

# # #

Jobmaster Magnets is The only designer, manufacturer and customized magnet supplier in Canada, Jobmaster Magnets brings value to diverse industries across North America including manufacturing, automotive, food, automation and plastics.