Economical Hepa Vacuum For Dust Control

April 26, 2010 - PRLog -- The HEPAVacuum™ fills the niche between expensive industrial HEPA vacuums and cheap shop vacuums retrofitted with a HEPA filter. It delivers an unmatched combination of value and performance.

The HEPAVacuum™ is a great value, priced at approximately half of what you’d pay for a large commercial HEPA vacuum. Plus it is certified. Many vacuums are sold with a HEPA label, but are not certified, and do not meet OSHA guidelines.

The HEPAVacuum™ provides superior dust collection compared to traditional shop vacuums because it is specifically designed for extra fine dust. Its proprietary filters have far greater surface area to support the high airflow rate needed to draw fine dust out of midair. The HEPAVacuum™ also features a roomy 16 gallon canister with the interior designed to support higher airflow. The canisters of many traditional shop vacuums are either too small or not designed to support the high airflow required for dust control applications. The main problem with retrofitting a HEPA filter into these shop vacuums is that it is like stuffing a sock in the exhaust port. It chokes off airflow and suction drops. Even if it appears to work at first, the filter often clogs quickly and the suction drops off quickly. The HEPAVacuum™ does not have these problems.

The WonderBag™ micro pre-filter also gives contractors a cost effective way to greatly extend the life of the HEPA filter. It captures particles down to .5 microns. That’s amazingly close to the .3 microns of the HEPA filter. That leaves your HEPA filter doing just what it was designed for – capturing only the finest of particle. Other vacuum systems allow all types of dirt and debris to reach the HEPA filter, shortening its life. The HEPAVacuum™ does not feature an agitator rod similar to the Dustless DustVac™.

Darren Diess, Vice President of Dustless Technologies said, “The HEPAVacuum™ gives contractors what they need to meet OSHA guidelines without spending an arm and a leg; and it’s a workhorse that far out-performs all the retrofit gadgets being pushed out there. We are very confident and proud of this product.”

Dustless Technologies™ is headquartered in Price, Utah and has been in business since 1988. Informative videos that show how these new products are used can be seen at http://dustlesstools.com/.