Tips for Installation of 2 DIN In-dash Car DVD Player

Nov. 2, 2009 - PRLog -- Have you purchased Double DIN car DVD player? So do you know how to install it without any professional’s help? If you are knowledgeable of car structure, you can try to install car DVD player based on the following instruction. If not, please ask professional for help.

Following is the simple instruction:

1. Remove the existing audio system which you want to replace, such as a radio head unit, DVD player, or other entertainment head unit. Be careful to leave any wires, brackets, or mounting harnesses intact and other accessories when removing the old unit, as they may be necessary when installing the 2 DIN DVD player.

2. Install the mounting sleeve. Take 2 DIN car DVD player from the box, the 2 DIN DVD player should already be resting in its mounting sleeve. Carefully remove the unit from the mounting sleeve, and then gently but firmly push the mounting sleeve into the space vacated by the previous radio, DVD player, or head unit. Bend the tabs on the mounting sleeve as necessary to secure it in place.

3. Connect the antenna. Depending on the make and model of car into which you are installing the 2 DIN DVD player, there will be either a coaxial cable running directly from a fixed antenna or a plastic wiring module with antenna inputs and power antenna controls. If the car features a plastic antenna wiring module, simply plug it into the large antenna input port on the rear of the 2 DIN DVD player. If the car offers a coaxial cable, push it carefully into the AM/FM port on the left of the DVD player’s rear panel and, if necessary, screw it clockwise to secure it in place. Be certain to run the antenna wires through the opening in which the player will be installed to create a neat appearance.

4. Connect the wiring harness. In most modern vehicles, the full audio/video wiring can be plugged directly into the 2 DIN DVD player by plugging the modular harness into the unit and pushing until it snaps into place. On older vehicles, or vehicles without a plastic wiring harness, a wiring harness adapter may be necessary to complete installation. These harnesses should be available from your local Dual Electronics dealer, though harnesses for rare vehicles may have to be special ordered from the manufacturer. As with the antenna wire, be certain to connect the wiring harness to the 2 DIN DVD player through the opening in which the player will be installed; when the player is pushed into place, the wires will be hidden behind the unit.

5. Test the unit. With the wiring harness and antenna plugged in, the 2 DIN DVD player should be fully operational. Test the unit by powering on or starting the car then pressing the “Power” button. If the unit fails to come on, or if it behaves erratically, check the wiring connections made in Steps Three and Four above. If the unit powers on and plays successfully, power it off, turn off the vehicle, and continue to Step Six.

6. Slide the 2 DIN DVD player into the sleeve. Carefully herd any protruding or stray wires into the opening where the 2 DIN DVD player will be installed, align the player with the opening in the mounting sleeve, then apply gentle but firm pressure to push the unit into place. The 2 DIN DVD player should slide easily into the mounting sleeve while offering only minimal resistance; if the unit seems difficult to push into the sleeve, remove it and check for any wires that may be blocking its movement. Secure the player in place using the screws provided with your 2 DIN DVD player.

7. Replace all car hardware. If you removed any of your car’s interior hardware–such as a plastic trim ring, shift knob, or carpeting–replace these items to finish installation of your 2 DIN DVD player.

Notice: If your 2 DIN DVD player came with an iPod plug (iPlug), place the iPlug adapter on a stable surface and secure it in place before attempting to operate your vehicle. If your 2 DIN DVD player is equipped with the optional GPS capability, be sure to connect your GPS antenna during steps three and four above.

Above is the simply steps to install 2 DIN car DVD player. And when you purchase car DVD player, there should be a detailed user manual for your reference. Please read it carefully before installation. It is helpful for you. All car DVD players on hotsaleoutlet.com have detailed user manual together with the item. And if there is any installation problem, you can ask us for help. At last I need to remind any customer that you need to install the car DVD player carefully and carefully. If you break any function in the process of installation, we won’t afford this responsibility of refund or repair. So if you are not good at installation, you must ask professional for help. A few scratches on the surface won’t be affected to refund if you are not interested it. But there is any function is broken, you need to take this responsibility. Even if you do not purchase the car DVD player from us, it also should be work in other online store.

So if you have any problem of installation, please ask us or local professional for help.

http://www.hotsaleoutlet.com/Wholesale-car-accesssory-2-d...

# # #

Wholesale Cell Phone Watches, Cell Phones, Car DVD Players, MP4 Players, Digital Video Cameras, MP3 Players, Spy Surveillance Cameras, Electronic Gadgets, Laptops, MP5 Players, Games Consoles