Follow on Google News News By Tag Industry News News By Place Country(s) Industry News
Follow on Google News | PACE Rework Station Software Installation for Indian ClientsPACE ST-325 is a flexible SMD Rework Station available in India by Sona Technologies. This is a simplified software installation guide with a diagram to help you understand it's advantages over the other competitors.
By: Sona Technologies We took this opportunity to highlight how the software is installed on your PC to make this hottest selling Desoldering/ Before we continue it is important to note that you take all the necessary electrical precautions to safe guard yourself from any burns or electrical shock while attempting the following procedure. The PACE model ST325 is one of the most ideal SMD Rework Station for post assembly rework, repair, and low volume/short run production operations. The software installed in this unit is very dynamic (as it can be connected to the computer for any alteration) will store a detailed criteria to physically remove and install Plastic Ball Grid Arrays (PBGAs), chip scale package (CSP), Land Grid Arrays (LGAs), Leadless Ceramic Carriers (LCCs) and Surface Mounted Devices (SMDs). ST325 gives you an exceptional thermal performance and true flexibility which makes it easier to use. The dynamic features of the software installed in this unit makes is much better performer than any other Rework Station in its class in India. With extraordinary service network spread across India makes it an ideal choice for every professional electrician in India. ST325 requires Rev 1.22 or higher firmware to make it work (or connect) with PC. A PC with a 9 pin (RS232C) serial port is required to connect it to ST325. Don’t worry if your PC does not have a 9pin Serial (RS232C) port, you can use a Serial to USB convertor cable to get the connection going. Check your PC for any viruses before installing the software. Put the PACE ST325 CD to your CD drive and wait for the instructions to appear on the screen. Follow the instructions. In case auto-run do not function, please browse the CD (by using My Computer) and double-click on setup or setup.exe. That is it. You are done with software installation part. Now connect your PC with ST325 (SMD Rework Station) using a serial cable. If you are using a Serial to USB cable then it is fine, else, do not over tighten the screws provided on the serial to serial (RS232) cable. Now double click on the installed application and you will face the main screen. Once inside the application you should create two types of profiles. The “timed” profile limits the profile controls to applying heat to the nozzle for a specific temperature and time duration. The “zoned” profile will control temperature and time durations for three independent zones that consist of the pre-heat, soak, and reflow. Each zone may be customized to fit the component requirement for installation (soldering) or removal (desoldering) Now you may work on customizing everything as per your requirements. This application will give you a virtual control to do anything possible with this class leading rework station. You may purchase ST325 at Sona Technologies and if you wish to download the brochure of this amazing product then please feel to download it from here. http://sonatechnologies.in/ http://sonatechnologies.in/ Sona Technologies | CALL: +91-8283820745 End
Account Email Address Account Phone Number Disclaimer Report Abuse
|
|