Follow on Google News News By Tag Industry News News By Location Country(s) Industry News
Follow on Google News | SGS Informs on Fourth Edition of EMC Standard IEC 60601 for Medical DevicesA new fourth edition of the EMC standard IEC 60601-1-2 was published in February 2014. SGS reviews the purpose and implications of the change.
EMC standard IEC 60601-1-2: What Has Changed and Why? The main reason for publishing this new edition of the EMC standard is the proliferation of mobile phones. People are carrying them around everywhere, including hospitals. When so many people have a mobile radio transmitter in their pocket, the immunity of medical equipment needs to be extended to a level that will allow the unrestricted use of mobile phones in hospitals and near medical devices. Also, compatibility to other wireless systems like WLAN, TETRA and RFID is included in the additional tests and frequency ranges. In the previous 3rd edition of the standard, the requirements were based on the purpose of the equipment. In the current 4th edition, the requirements are based on the intended use environment of the equipment: - Professional healthcare facilities (hospitals, clinics) - Home healthcare environments (other locations) - Special environments (military, industrial, planes/helicopters, cars etc.) The standard includes some new definitions: - Intended use (medical purpose only) - Normal use (including medical use and transport, maintenance, standby) From Risk Management File to Essential Performance of Mobile Devices One of the key issues is risk analysis by the manufacturer. In the Risk Management File (RMF), Essential Performance (EP) and Basic Safety with regard to electromagnetic disturbances of the equipment to be tested shall be defined. The RMF shall also include and define deviations of functionality and performance during EMC phenomenon. Before any tests can be started, careful planning and good communication between the testing laboratory and the manufacturer are essential. This planning has to be documented in a test plan. The EMC laboratory (http://www.sgs.com/ Changes for the emission requirements are minimal. ITE shall now fulfil CISPR 32 and as an informative change, common mode emissions for patient cables are introduced. In addition, a more detailed guide is given in the 4th edition of the standard for selection of emission class A or B, depending on intended use and location. Standard IEC 61000 Series and Immunity Requirements Changes for the immunity requirements are numerous and substantial, for example: - IEC 61000-4-2 ESD: higher 8/15 kV test levels are required, connector tests modified. - IEC 61000-4-3 Radiated RF: Extended frequency range 80-2700 MHz, 3/10 V/m levels, transmitter exclusion band eliminated. - New test for proximity field immunity: 15 discrete frequencies, levels 9-28 V/m, pulse modulations up to 6 GHz. - IEC 61000-4-4 Burst/EFT: Repetition rate has been increased from 5 kHz to 100 kHz. - IEC 61000-4-6 Conducted RF: 6V/m test level at ISM frequencies and amateur bands. - IEC 61000-4-8 Magnetic immunity: Considerably higher test level of 30 A/m instead of 3 A/m. - IEC 61000-4-11 Voltage dips: Modified dips / interruptions. - New tests for vehicle equipment, ISO 7637-2 transients (12 VDC) and emissions according to CISPR 25. - New references to RTCA DO-160G for additional requirements concerning intended use in aircraft. Selected pre-compliance tests are strongly recommended during development process to ensure that the new requirements can be fulfilled by the system. Medical Devices and When to Apply the New Edition of the EMC Standard? There is no transition period for IEC standards. When a new edition is published, it is valid immediately. In the CB scheme there a no definite rules on when to apply the new edition of a collateral standard. Detailed regulation on transition will be implemented on a national level. However, it is possible to give some guidance, based on IECEE’s Operational Document OD-2055 (http://www.iecee.org/ 1. When a medical device (MD) is tested and certified according to the 2nd edition of the basic standard IEC 60601-1, the corresponding EMC standard IEC 60601-1-2, ed. 2:2000 + Am.1:2004 is applied. 2. When a MD is tested and certified according to the 3rd edition of the basic standard, the corresponding EMC standard is IEC 60601-1-2, ed. 3:2007. However, it is possible to test and certify the MD against the EMC requirements separately. In that case the 4th edition can be applied. 3. When the MD is tested and certified against requirements of the 3rd edition + Am1:2012 of the basic standard, it is possible to apply both the 3rd and 4th edition of the EMC standard. However, it should be noted that some particular standards include a dated reference to the EMC standard as normative that should be applied. In spite of that, SGS does recommend applying the most recent edition 4. Within the EU region, presumption of conformity is dictated by the list of harmonized standards that is published in the Official Journal. Unfortunately, there is an ongoing clash between the EU Commission and standardization organizations that has practically paralyzed the list of harmonized standards. Because of that, the manufacturer’ For further information, please contact an SGS expert. Contact details: SGS Consumer Testing Services Seppo Vahasalo Product Line Manager SGS Fimko Oy Särkiniementie 3 Helsinki 00210 Finland LinkedIn: www.linkedin.com/ Website: www.sgs.com/ SGS is the world’s leading inspection, verification, testing and certification company. SGS is recognized as the global benchmark for quality and integrity. With more than 80,000 employees, SGS operates a network of over 1,650 offices and laboratories around the world. End
Account Email Address Account Phone Number Disclaimer Report Abuse
|
|