Follow on Google News News By Tag Industry News News By Place Country(s) Industry News
Follow on Google News | PoolFilters.Biz Expounds the Installation Instructions for Jandy Pool FiltersJandy pool filters are durable and work efficiently. However, utmost care must be taken while installing these filters. Read on to know how to install them.
By: PoolFilters.Biz Location of the filter: The first thing that you must look out for while selecting a location for the filter is a well-drained area. Make sure that the area does not flood during rains. It is better to look for another area if the area that you have chosen is non-ventilated and damp. Mounting the filter: The pump system and the filter, both need a solid mounting. In order to eliminate the risk of the filter and pump from falling down, preferably install it on solid blocks or on a concrete slab. If your slab is uneven and you are planning to level it by using sand, then you must drop this idea. The sand will get washed by the water and the filter and the pump might fall from the slab. Installation of electrical controls: None of the electric controls must be close to the filter and the pump. Make sure that you install the electrical controls at a distance of at least 5 feet from the filter. Clearance around the filter: Every Jandy product part must be clearly visible, so that if any problem arises, you can easily figure out the filter part giving trouble. Make sure that the clamp ring is easily visible. If there is not enough room around the filter, clear the surroundings. Space above the filter: The filter cartridges need to be cleaned from time to time, thus, the space above the filter should be sufficient enough to easily remove and replace the lid of the filter. If you install your filter in a compact place, each time removing and replacing the lid of your filter can turn out to be a tedious task for you. Jandy products are extremely easily to handle, so, if installed in the right manner, you need not call for a professional help each time. Drainage of water: The filter should be positioned in such a manner that the water gets drained easily and does not form a puddle. If the water does drain out properly, people moving around might slip. Also, make sure that you align the air release valve in such a manner that the air and water is released directly and safely. Install the filter carefully if it has to be located above the water level of the pool: In cases when the filter has to be installed above the pool's water level, do it carefully. The filter can be raised to a height of around 2.5 feet. The suction line leading to the pump should also have a check valve. About PoolFilters PoolFilters.Biz is a one-stop destination for shopping of pool and spa maintenance products and accessories. One can find a wide range of pool accessories and products under one roof. Every product is branded, hence durable and reliable. Moreover, the products are priced economically, which makes shopping even more fun-filled! Contact Address: 3645 Marketplace Blvd. Suite 130-330 East Point, GA 30344 Phone : 888-300-2552 Email : sales@poolfilters.biz Website : http://www.poolfilters.biz/ End
Account Email Address Account Phone Number Disclaimer Report Abuse
|
|