Poolfilters Notifies about the Process of Changing Pool Filter Cartridges

EAST POINT, Ga. - Nov. 18, 2014 - PRLog -- East Point, GA, Atlanta – 18 Nov, 2014 – Poolfilters.Biz, one of the largest dealer of pool and spa parts and accessories notifies about how the process of changing pool filter cartridges should be carried out.

There can be nothing better than taking a dip in your swimming pool on a hot day, but the fun and excitement will remain intact only when the water of your pool is crystal clear and free of impurities. To keep your pool water clean, it is extremely important to install a  high-quality pool filter, but only installing a filter is not enough. The pool filter cartridges must be cleaned from time to time and when needed, must be replaced immediately. However, you must not remove and place the new filter cartridge hastily – this process should be carried out carefully and with ease. Here is a step-by-step guide that will make the task of replacing a filter cartridge easy for you.

• Switch off the main breaker using a home breaker box. Next, identify the buttons in the main breaker and mark the each button so that you know which one has to be shut off.

• The next thing that needs to be checked are the valves. Make sure that all the valves are shut with the help of valve levers.

• Rotate the release control device to your right side and allow the air to pass through the filter.

• Next you need to open the filter box and remove the filter cartridge in an upward direction. For this, the cap located at the top needs to be removed. Loosen the screws that are fit tightly around the lodging and pull the cap. Once the cap is removed, the filter cartridge can be pulled out easily. In case of any confusion, follow the instructions given on the manual.

• Once the old filter cartridge has been removed, you need to fit in the replacement filter cartridge. Slide the replacement cartridge into the lodging area very carefully and place the cap back on the top of the lodging area and tighten the screws. While doing so, make sure you firmly fix all the screws.

• Once done, open all the valves and switch the filter on using the breaker. Let the filter work for sometime. After things get back to normal, the air release valve should be shut.

By performing the above mentioned steps carefully, you can easily replace the cartridges of your pool filter. This will save your money as you will not have to call for a professional help. Also, when your filter will be providing high-performance, you can enjoy a splash into clear water at anytime of the day. Make sure that once you replaced the cartridges of your filter, you clean them from time to time. A quick cleaning session can be carried out once in two weeks and a deep cleaning session must be carried out once in 2-3 months.

About PoolFilters

Poolfilters.Biz has been satisfying the needs of every pool and spa owner with their high-quality products for almost 10 years now. Every pool and spa maintenance product and accessory available here is branded and reliable. Customers can choose from the wide range of products that are available at low prices.

Contact Address:
3645 Marketplace Blvd.
Suite 130-330
East Point, GA 30344
Phone : 888-300-2552
Email : sales@poolfilters.biz
Website : http://www.poolfilters.biz/