Technology Training Corp. Announces "3D Printing & Additive Manufacturing" symposium

Oct 21-22, 2014 in Arlington, VA "3D Printing & Additive Manufacturing" symposium for Defense and Government - Senior Experts for DoD/MIBP, America Makes, Army Rapid Equipping Force, NASA, Army RDECOM, OPNAV/N41, NIST, NSF, DOE, Army ARL & others!
 
Oct. 10, 2014 - PRLog -- Symposium on 3D Printing

and Additive Manufacturing

Washington, DC • October 21-22, 2014

Symposium Agenda

Day One: October 21, 2014

9:00-9:05         Administrative Announcements

9:05-9:35         MR. EDWARD MORRIS, Director, America Makes – The National Additive Manufacturing Innovation Institute and Vice President, National Center for Defense Manufacturing and Machining

“America Makes – Perspectives and Initiatives”

9:35-10:05       CAPTAIN FRANK W. FUTCHER, Director, Navy Business Operations and Total Ownership Cost Branch, Office of the Deputy Chief of Naval Operations for Fleet Readiness and Logistics (OPNAV N41)

“Overview of Navy’s Additive Manufacturing Efforts and the Way Ahead”

10:05-10:35     COLONEL STEVEN SLIWA, Director, Rapid Equipping Force, US Army

“3D Printing, Additive Manufacturing and Rapid Force Equipping”

10:35-10:55     Coffee and Networking

10:55-11:25     MR. ROGER KILMER, Chief Manufacturing Officer, National Institute of Standards and Technology (NIST)

“Importance of Measurements and Standards for Additive Manufacturing and 3D Printing”

11:25-11:55     DR. KHERSHED COOPER, Program Director, Nanomanufacturing, National Science Foundation (NSF); former Program Officer, Manufacturing Science, Office of Naval Research

“Additive Manufacturing – Capabilities, Achievements, Prospects”

11:55-12:25     Senior Representative, Office of Manufacturing and Industrial Base Policy, DoD [invited]

“DoD Manufacturing Plans, Programs and Initiatives”

12:25-1:30       Lunch

1:30-2:00         MS. STACEY KERWIEN, Deputy Chief, Materials Manufacturing and Prototype Technology, US Army Research, Development and Engineering Command

“Army Manufacturing Plans and Programs”

2:00-2:30         DR. DEVANAND SHENOY, Chief Engineer, Advanced Manufacturing Office, Department of Energy (DOE); former Senior Advisor, Manufacturing and Industrial Base Policy (MIBP), Office of the Secretary of Defense

“The DOE Advanced Manufacturing Office’s Perspectives on 3D Printing”

2:30-3:00         MR. BRIAN ROSENBERGER, Lockheed Martin Fellow, Lockheed Martin Aeronautics Company

“Opportunities for Production Implementation of Additive Manufacturing at Lockheed Martin Aeronautics”

3:00-3:30         MR. NEAL ORRINGER, Vice President, 3D Systems, Inc. “Government-Industry Partnerships in 3D and AM”

3:30-4:00         Refreshments and Networking

4:00-4:30         DR. RAYMOND CLINTON, Deputy Director, Science and Technology, NASA Marshall Space Flight Center

“NASA Perspectives and Initiatives”

4:30-5:00         MR. JASON DUNN, Founder and Chief Executive Officer, Made In Space, Inc.

“3D Printing in Space”

Day Two: October 22, 2014

9:00-9:05         Administrative Announcements

9:05-9:35         DR. MARTY IRVINE, Head, Maritime and Joint Systems Department, Naval Surface Weapons Center (NSWC)

“3D Printing at NSWC”

9:35-10:05       LIEUTENANT BEN KOHLMANN, Project Manager, Print-the-Fleet, Rapid Innovation Cell, Chief of Naval Operations

“Print-the Fleet – How 3D Printing Can Inspire a Culture of Innovation”

10:05-10:35     MR. LARRY HOLMES, Principal Investigator, Additive Manufacturing, Army Research Lab (ARL)

“3D Printing and Additive Manufacturing at ARL”

10:35-10:55     Coffee and Networking

10:55-11:25     MR. JAMES ZUNINO, Senior Materials Engineer, Materials, Manufacturing and Prototype Technology Division, Picatinny Arsenal

“3D Printing and Additive Manufacturing at Picatinny Arsenal”

11:25-11:55     CAPTAIN (USN) GERALD GRANT, DMD, Service Chief, 3D Medical Applications Center, Walter Reed National Military Medical Center

“Use of AMT in Medical/Dental for Reconstruction and Rehabilitation of Wounded Warriors”

11:55-12:25     DR. PETER C. LIACOURAS, PhD, Director of Services, 3D Medical Applications Center, Walter Reed National Military Medical Center

“Digitally Designing and Additive Manufacturing Custom Prosthetic Devices and Attachments to Aid in Wounded Warrior Rehabilitation”

12:25-1:30       Lunch

1:30-2:00         DR. BRADLEY R. RINGEISEN, Head, Bioenergy and Biofabrication Section, Naval Research Laboratory

“3D Bioprinting for DoD and Government Applications”

2:00-2:30         DR. RICHARD GRYLLS, General Manager, and MR. TOM McDONALD, Program Manager, Laser-Engineered Net Shaping (LENS), Optomec

“Advances in Metal 3D Printing and Additive Manufacturing”

2:30-2:50   Refreshments and Networking

2:50-3:20         DR. ALEXANDER H. MUELLER, Head,Chemistry Division, Chemical Diagnostics and Engineering, Los Alamos National Laboratory (LANL)

“3D Printing and Additive Manufacturing at LANL”

3:20-3:50         Senior Representative, The Boeing Company [invited]

“3D Printing and Additive Manufacturing at the Boeing Company”

Contact
Ken Hood
***@ttcus.com
310-320-8110
End
Source: » Follow
Email:***@ttcus.com
Posted By:***@ttcus.com Email Verified
Tags:3d, Printing, Manufacturing, 3d Printing, Army
Industry:Manufacturing, Technology
Location:District of Columbia - United States
Subject:Events
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
Technology Training Corporation PRs
Trending News
Most Viewed
Top Daily News



Like PRLog?
9K2K1K
Click to Share