1 NetFlow-Lite is supported on LAN Base or IP Lite SKUs only.
2 NetFlow-Lite is supported in Mixed Stack, on 2960-X series ports only.
3 Only Sampled NetFlow is supported.
4 Ingress flows are only monitored.
5 Flows are monitored on Physical Ports and VLAN Interfaces(SVI)
6 One monitor per interface is supported.
7 Permanent and Normal Cache are supported for the monitor.
8 NetFlow Version 9 is supported for Exporter.
9 Deterministic Sampler is not shared. Every attachment with same Deterministic Sampler uses up one free sampler.
10 Random Sampler is shared. Only one sampler is used when Random Sampler is attached to different Ports or SVIs.
flow record record1
match ipv4 protocol
match ipv4 destination address
match transport destination-
collect flow sampler
collect counter bytes long
collect counter packets long
collect timestamp sys-uptime first
collect timestamp sys-uptime last
flow exporter exporter1
transport udp 9994
flow monitor monitor1
cache timeout active 60
statistics packet protocol
mode random 1 out-of 32
mode deterministic 1 out-of 55
switchport access vlan 10
switchport mode access
ip flow monitor monitor1 sampler rdm_sampler input
switchport access vlan 23
ip flow monitor monitor1 sampler det_sampler input
ip address 10.64.71.77 255.255.255.128
The customers who are interested in Cisco 2960-X series switch, 3anetwork.com keeps regular stock of the below models: