Follow on Google News News By Tag Industry News News By Location Country(s) Industry News
Follow on Google News | Huawei switch: PoE Function Does Not Take EffectThis section describes the troubleshooting flowchart and provides a step-by-step troubleshooting procedure to use when the PoE function does not take effect.
By: 3anetwork Common Causes This fault is commonly caused by one of the following: 1 No PoE power supply is installed. 2 The PoE power supply is not functioning properly. Troubleshooting Procedure The following information is displayed when you run display poe device command: Error: No current active PoE board. NOTE Saving the results of each troubleshooting step is recommended. If troubleshooting fails to correct the fault, you will have a record of your actions to provide Huawei technical support personnel. Procedure Step 1 Check that the PoE power supply is installed. The S5700&S6700 PWR model can provide the PoE function only after a PoE power supply is installed. The S5700&S6700 uses AC power supplies to provide the PoE function. Each PoE power supply has a fan. Before using the PoE function, ensure that a PoE power supply is installed. 1 If the PoE power supply is not installed, install it. 2 If the PoE power supply is installed, go to step 2. Step 2 Check that the PoE power supply is functioning properly. Run the display power command to check the status of the PoE power supply. 1 If the PoE power supply is in Abnormal state, replace the PoE power supply. 2 If the PoE power supply is in Normal state, the PoE power supply is functioning properly. Go to step 3. Step 3 Collect the following information and contact Huawei technical support personnel. l Results of the preceding troubleshooting procedure l Configuration files, log files, and alarm files of the S5700&S6700 ----End Huawei S5700, competitive price on Huanetwork.com, http://www.huanetwork.com/ End
Account Email Address Account Phone Number Disclaimer Report Abuse
|
|