NAMSR News: Real-time 3-D images from inside the heart provided by single chip device

ARLINGTON, Va. - Feb. 25, 2014 - PRLog -- Researchers have developed the technology for a catheter-based device that would provide forward-looking, real-time, three-dimensional imaging from inside the heart, coronary arteries and peripheral blood vessels. With its volumetric imaging, the new device could better guide surgeons working in the heart, and potentially allow more of patients' clogged arteries to be cleared without major surgery.

The device integrates ultrasound transducers with processing electronics on a single 1.4 millimeter silicon chip. On-chip processing of signals allows data from more than a hundred elements on the device to be transmitted using just 13 tiny cables, permitting it to easily travel through circuitous blood vessels. The forward-looking images produced by the device would provide significantly more information than existing cross-sectional ultrasound.

Researchers have developed and tested a prototype able to provide image data at 60 frames per second, and plan next to conduct animal studies that could lead to commercialization of the device.

"Our device will allow doctors to see the whole volume that is in front of them within a blood vessel," said F. Levent Degertekin, a professor in the George W. Woodruff School of Mechanical Engineering at the Georgia Institute of Technology. "This will give cardiologists the equivalent of a flashlight so they can see blockages ahead of them in occluded arteries. It has the potential for reducing the amount of surgery that must be done to clear these vessels."

Details of the research were published online in the February 2014 issue of the journal IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control. Research leading to the device development was supported by the National Institute of Biomedical Imaging and Bioengineering (NIBIB), part of the National Institutes of Health.

"If you're a doctor, you want to see what is going on inside the arteries and inside the heart, but most of the devices being used for this today provide only cross-sectional images," Degertekin explained. "If you have an artery that is totally blocked, for example, you need a system that tells you what's in front of you. You need to see the front, back and sidewalls altogether. That kind of information is basically not available at this time."

The single chip device combines capacitive micromachined ultrasonic transducer (CMUT) arrays with front-end CMOS electronics technology to provide three-dimensional intravascular ultrasound (IVUS) and intracardiac echography (ICE) images. The dual-ring array includes 56 ultrasound transmit elements and 48 receive elements. When assembled, the donut-shaped array is just 1.5 millimeters in diameter, with a 430-micron center hole to accommodate a guide wire.

Power-saving circuitry in the array shuts down sensors when they are not needed, allowing the device to operate with just 20 milliwatts of power, reducing the amount of heat generated inside the body. The ultrasound transducers operate at a frequency of 20 megahertz (MHz).

CANDIDATES WHO WANT TO BREAK INTO MEDICAL SALES:

RMSR® Medical Sales Certification offered by the National Association of Medical Sales Representatives is designed for entry level medical device sales reps. The course covers a wide array of topics pertaining to industry knowledge that candidates need to acquire before applying to medical sales positions.

The course and training helps to develop the industry skills, maximizing the candidates potential and goals, as well as making them feel valued and stimulated in their role when communicating with members of the medical community. By an applicant acquiring medical sales training and a RMSR Certification, it puts him/her in a position of strength and qualifies them for medical sales jobs. Medical knowledge is key in this industry and when communicating with doctors, surgeons, and nurses etc. It is extremely important for representatives to use key terminology pertaining to the medical product he/she will be promoting. The only way to succeed in this industry is to garner actual sales. Doctors and Surgeons will not acknowledge a Sales Rep who is not proficient in essential medical terminology, knowledgeable of medical devices/equipment and the anatomy. For those lacking a solid sales background the RMSR course covers knowledge of medical selling techniques and regulation such as Effective Territory Management, Effective Networking, Medical Sales Ethical & Regulatory Guidelines and more.

The National Association of Medical Sales Representative™(NAMSR) is the largest professional association in the world for Medical Sales Representatives. Through our numerous members, the NAMSR™ provides accredited training, continuing education, information about the industry, up-to-date news, programs to assist medical sales reps in their work, training programs to assist candidates who want to break into the industry and initiatives to improve communication with the medical sales field.

For more information on the NAMSR or the RMSR certification visit www.medicalsalescareer.com or call 800-313-9198