Ideally suited to the OCTG sector the IROSS Fluxmanager system is specifically designed for use in applications such as; Preheat for Welding, Preheat for Swaging, Hardening, Annealing, Removal of Cure & Coatings, and Friction Weld & Stress Reliving. The patented Fluxmanager unit utilises an efficient 50/60Hz low frequency system which provides deep, uniform temperature distribution, ID/OD, both laterally and longitudinally along extended lengths of pipe ends. The pipe end exits the coil immediately with an unrivalled and repeatable temperature uniformity of +/-25°C (77°F) – No soak time is required.
The IROSS Fluxmanager system has quickly become recognised and adopted into the OCTG sector as standard equipment and when compared with traditional medium frequency pipe end heating techniques, the IROSS Fluxmanager allows for far greater control of end heating, with a shaped intensifier to concentrate power on the work piece. The system heats within tight specifications at a reduced cycle time and easily adapts to O.D. variation.
Additionally only 4 coil sizes are required to cover the entire range of OCTG pipe diameters. The shaped flux concentrator allows for completely repeatable results even when the pipe is placed non-concentrically in the coil itself. Infrared, thermal imaging and intuitive data logging functionality can be specified by the customer in order to satisfy the stringent quality requirements within the OCTG market.