PRLog - April 23, 2013 - GRAND RAPIDS, Mich. -- The AS2 Magnum Pro Shot construction laser is designed for all grading and pipeline contractors working on small or large, commercial or municipal construction sites. The electronic servo leveling means all you do is dial in the desired slope, turn the laser on and watch it drive to level.
AS2 Magnum Pro Shot Grade Laser
Included with the AS2 Magnum is the S2 kit. The S2 kit gives you the capabilities of dual grade. It enables the laser to be set and aimed for projecting a compound (dual) slope. The AS2 Magnum Pro Shot laser is perfect for the contractor that is doing grading, sewer lines, general
excavating or drainage.
The AS2 Magnum Pro Shot laser comes in a package with the R8 laser receiver and bracket to attach to any aluminum or fiberglass leveling rod. Every AS2 Magnum Pro Shot laser is individually tested through a range of temperature to assure that it will perform under your jobsite conditions.
Working Range 3000 ft. diameter with R8 laser receiver
Rotational Coverage 360 degrees
Accuracy ± 10 arc seconds (± .60 in. per 100 ft.)
Grade Capability 0 – 25%
Height Alert Prevents errors if laser is disturbed
Leveling Method Electronic sensors / servo motor driven
Rotating Beam 670nm class ll
Power 70 hours on 4C alkaline batteries
55 hours of 4 NiMH rechargeable batteries
Environment Water and dust resistant
Warranty 3 year warranty
Lasco Laser & Instrument Company has been a full line warranty and non-warranty repair center for the full line of Laser Reference Pro Shot AS2 grand Lasers. Lasco Laser and Instrument Co. has been a factory certified repair center for Laser Reference Pro Shot products for over 20 years.
About Lasco Laser & Instrument Company
LASCO Inc. has been serving the construction industry since 1975. We are the leading source for construction lasers, surveying instruments, automatic machine control systems and supplies for the entire construction industry. We are proud to represent names like Laser Alignment, Chicago Steel Tape, Leica Geosystems, Sokkia, Stabila, Agatec, David White, Pacific Laser Systems, and Crain to name just a few.
For more information contact:
Dan Hill, Lasco Laser & Instrument Company
Toll Free (US/Canada): 866-374-5428 Tel: 616-949-5070 or DHill@lascolaser.com
Visit http://www.lascolaser.com or http://www.laser-
Name: Lasco Laser & Instrument Company.
Address: 3220 Jefferson Ave SE
City: Grand Rapids