Fairview Microwave now offers 1.85(V) 60 ghz power dividers

March 4, 2013 - PRLog -- Fairview Microwave has an announcement of a new product launch: 1.85 60 ghz power dividers.  Power dividers are needed when trying to split a signal but can also be used to combine a signal.  Power dividers tend to perform better when splitting a signal rather than combining a signal.  The 1.85 is typically a high precision connector used in many test applications and high frequency applications.  The 1.85 interface is structured very similar to the 2.4 but is intended for much higher frequencies as the 2.4 is limited to 50 ghz, 27 ghz when modified.  1.85 connectors can be mated with 2.4's as long you're careful, paying much attention to alignment when mating.  1.85 connectors is one of a few limited number of that's capable of higher than 60 ghz.

The frequency range of Fairview Microwave’s 1.85 power divider is 8 to 60 Ghz.  It has a maximum input power handling of 10 watts.  The VSWR of the power divider is 2.0 to 1 while the insertion loss is at 3.0 dB max.  The amplitude balance of the power divider is 1 dB max and the connectors on the power divider are passivated stainless steel.  The contacts are Beryllium Copper and the plating for the contacts are gold.  The power divider has an isolation of 10 dB minimum with a phase balance of 15 degrees max.

Pricing, inventory levels, images, and spec sheets are available at http://www.fairviewmicrowave.com/sma_2-way_power_dividers....  Any questions or requests for further details are welcome, please contact Fairview Microwave for your inquiries.  For other types of power dividers with different connector configurations or frequency ranges, check http://www.fairviewmicrowave.com/coaxial_power_dividers_s....