New WD HDD Repair And Data Recovery Tips

This is one data recovery technique article introducing the latest hdd repair and data recovery methods to repair and recover WD PCB1698 series when these drives become undetected or keep busy.
By: Dolphin Data Lab
 
Jan. 25, 2013 - PRLog -- For WD PCB1698 series, it’s one difficult data recovery job if the hard drive is not detected or keeps busy. So far it’s almost not possible for any other firmware repair tools to repair this kind of drive and get lost data back.

Situation becomes worse if these kind of PCB1698 hard drives don’t have the cache loader-module 13 and if the module dir is missing or damaged without backup, no other tools except DFL-WDII can repair such kind of hdd failure and recover the data.

Here in this article let’s discuss how to repair undetected or un-ready WD PCB1698 hard drives with DFL-WD II hdd repair tool.

Option 1: Users can use the universal loader-module 11 and ROM offered by Dolphin Data Lab deal with the patient hard drives.

With the offered loader and ROM: If the hdd can reach readiness, users can access the hdd, load the module 11 and then the program will automatically detect the dir module and give users to import one dir module or the DFL program will search it from the tracks users assign.

If the hdd stays busy, users need to enter kernel mode/safe mode and write the ROM we offer or find a donor ROM to write so that the hdd can become ready and then access to hdd detecting the module dir automatically from tracks and then check modules, repair modules and then recover data with DFL-DE data recovery tool.

Option 2: Use Hot Swap Method to access to the HDD.

Find one donor hard drive of the same family with same head numbers;
Connect the donor hard drive to DFL-WDII program, power on the hdd and then stop the motor;
Remove the PCB from the donor hard drive while it it ready;
Put the PCB from the donor to the patient hard drive;
Power up the patient hard drive, enter DFL program, start motor and the hdd will become ready and at this time the tracks of the patient hdd can be read and next is to write down the SPT value;
Without powering off the hdd, close the corrent function interface and go back to program start interface, re-enter the program, fill in the SPT text box with the written-down value and then continue. The program will go to search the module 01 automatically and then check modules in ABA mode.

Note: Sometimes the module 01 detected enables the users to check modules but find most modules are damaged. This is because the module 01 is not the real one. Users need to change the track range by skipped the searched track location and then find the real necessary module 01.

In above methods, users can repair the hdds and get the lost data back successfully.

Users can learn more about these new hdd repair tools and data recovery tools and technologies here:

http://www.datarecoverytools4u.com/category/dfl-case-stud...

http://www.datarecoverytools4u.com/products/
End
Source:Dolphin Data Lab
Email:***@datarecoverytools.co.uk Email Verified
Tags:New Recovery Tools, Hdd Repair, Wd Repair
Industry:Computers, Technology
Location:England
Account Phone Number Verified     Disclaimer     Report Abuse
Data Recovery Salon PRs
Trending News
Most Viewed
Top Daily News



Like PRLog?
9K2K1K
Click to Share