Outwater Introduces its Battery Operated LED Wafer Puck Lighting System

Cheaper than installing an electrical outlet, Outwater has once again redefined the standard for lighting with the introduction of the first of its kind, economically priced Battery Operated LED Wafer Puck Lighting System.
 
Nov. 9, 2012 - PRLog -- Cheaper than installing an electrical outlet, Outwater [Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC] has once again redefined the standard for lighting with the introduction of the first of its kind, economically priced Battery Operated LED Wafer Puck Lighting System.

Ideally suited for use in existing cabinets, drawers, closets or extremely tight applications in which electrical outlets are not readily accessible or cannot be readily installed because of confined space limitations, Outwater’s unobtrusive, ultra low profile Battery Operated LED Wafer Puck Lighting System can be easily surface mounted virtually anywhere via the system’s incorporated peel & stick tape, screws or available magnets without anyone having to possess any special knowledge of electronics, making its use perfect for retrofitting and remodeling.  Furthermore, because Outwater’s Battery Operated LED Wafer Puck Lighting System utilizes a low voltage power source, there is absolutely no risk of shock or of unintentionally shorting out the system, thus negating the need for an electrician.

Designed to release the system’s refrigerator type on/off plunger switch by merely opening the cabinet door, drawer or closet to which it has been mounted, Outwater’s Battery Operated LED Wafer Puck Lighting System will provide 90 seconds of either warm white (3000k) or natural white (4000k) illumination before turning off.  For continuous lighting, the 90 second timer can be manually turned off.

Similar in illumination to a 20 watt halogen bulb, Outwater’s dimmable Battery Operated LED Wafer Puck Lighting System is ultra energy efficient, with an approximate 50,000 hour bulb life.  Additionally, no heat emission or generated UV radiation ensures that stored clothing will not fade.  

Fully powered using just D batteries, which should last for approximately 1-1/2 to 2 years under normal use, the battery housing not only facilitates quick and easy battery replacement, because it is independent of Outwater’s Battery Operated LED Wafer Puck Lighting System, it can be inconspicuously located anywhere for convenient access.    

Outwater’s Battery Operated LED Wafer Puck Lighting System is also available for use with a transformer.  

Outwater’s Battery Operated LED Wafer Puck Lighting System Product Summary:

• Cheaper than installing an electrical outlet - No need for an electrician
• Ultra low profile - Ideally suited for use in existing cabinets, drawers, closets or other tight applications
• Utilizes a refrigerator type door plunger switch to turn the lights on and off
• A built-in timer will automatically turns the lights off after 90 seconds, thus saving battery power
• The timer can be turned off for continuous lighting
• Operates on D batteries - No AC power or transformer is required
• The battery housing can be located anywhere
• Low voltage - No risk of shock or shorting out
• Similar in illumination to a 20 watt halogen bulb
• Offered in warm white (3000k) or natural white (4000k)
• Surface mounts with supplied peel & stick tape, magnets or screws

For further product information, please click the enclosed link or copy and paste it into your web browser:  

http://www.outwatercatalogs.com/lg_display.cfm/catalog/Ma...

About Outwater [Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC]: Outwater can be contacted Toll Free at 1-800-631-8375 (For sales and product information in the USA & Canada) / 1-201-498-8750 (For sales and product information outside of the USA & Canada) or viewed online at www.outwater.com  

From the vendor of a single product in August 1972, Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC, with sales and distribution facilities in New Jersey and Arizona, are recognized today as well established international manufacturers and stocking distributors of more than 65,000 standard and innovative component products required by woodworkers, cabinet and furniture manufacturers, builders, remodelers, designers, architects, point-of-purchase and display fixturing manufacturers, OEM's, as well as a very diversified range of other commercial and retail end users.

Major Product Categories include Plastic & Aluminum Extrusions; Lighting and Lighting Accessories; Furniture, Cabinet & Store Fixture Components; Knobs & Pulls; Casters; Fasteners; Laminates; The FOGA Exhibit & Display Fastening System; The Klem Connector; Literature Displays; Slatwall; Sign Holders; P.O.P Components; Display Motors & Turntables; Pedestals; Injection Molded Parts; Brass Tubing & Fittings; Surfacing Materials; Interior & Exterior Polymer & Wood Architectural Mouldings & Millwork; ORAC DECOR and DEM Architectural Mouldings & Millwork; Columns & Capitals; Balustrading; Wrought Iron Components; Decorative Stamped Steel & Polymer Ceiling Panels; Wainscoting; Wall Coverings; Fireplace Surrounds; Plastic "Glass" Block; Plaster Architectural Elements; Period & Contemporary Hardware; Kitchen & Bath Accessories; Kitchen & Bath Cabinetry and Vanities… and so much more!

Contact:
Joey Shimm, Director of Marketing
Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC
(201) 498-8750
End
Source: » Follow
Email:***@outwaterplastics.com Email Verified
Zip:07603
Tags:Outwater Plastics, Led Lighting, Movable LED Lighting
Industry:Home, Manufacturing
Location:Bogota - New Jersey - United States
Subject:Products
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
Outwater Plastics Industries, Inc. News
Trending
Most Viewed
Daily News



Like PRLog?
9K2K1K
Click to Share