Srisms battery charger is designed to charge poor-functional batteries or batteries which have lost their rated capacity. In this condition even exchange rate is too less. This is a12V rated one and is to be used only for 12V rated lead acid batteries only. It is better to use Srisms battery liquid along with Srisms pulsar with charger to charge the battery. In this way the battery rejuvenates at a quicker pace and the charge stays long. Since this is 12V 5amp rated one and takes about 20hours (approx) to fully charge a 100Ah battery-working battery (charging timing is not constant for each battery due to various conditions). This is useful for slow charging only.
The indicators on the right side of the Pulsar unit has two LED’s (Red LED – for low battery – glows when voltage of the battery is less than 10.V and Green LED – for battery full – glows when voltage of the battery is more than 13.7V). However both will glow when no battery is connected and the unit is connected to power. After connecting to power and battery only the specified LED will glow or indicate the status of the battery. On the left side only one indicator glows – showing the status of the pulsar. However this will go dim if it is connected to battery of higher rating above 5amps or if the battery is also connected with another charger / inverter.
Results will vary largely depending upon the function of the battery and other issues. In most conditions results will come only after a two weeks or so. This is a slow acting principle and will not give you instant results. Can be used for newer batteries also but you will not know the results of the pulsar hence recommended to be used when you find the capacity / back-up time of the inverter has come down. This generally happens after the warranty period. However these conditions may change due to many factors.
This is useful for batteries in vehicles, trucks, fork lift vehicles, inverter batteries, emergency vehicles, boats etc where ever there is regular charging of lead acid batteries.This is one answer for common questions like: How to revive a dead battery, how to bring a low efficiency battery to life again, how to rejuvenate a battery, how to make a dead lead acid battery come alive again, bring back to life, making battery to work for you more, how to improve the life of a battery, how to improve the efficiency the battery, how to prolong the life of lead acid battery, how to recharge a battery,
Technical Specifications of SriSMS Battery Charger with Pulsar
Ø Proven Technology Flyback CVCC-PWM Control.
Ø Very Compact Size/ Light Weight.
Ø Wide Input Range / highly efficient.
Ø Output over Load, Short circuit Protection
Ø All double rated component used in product for reliability and long life.
Ø Soft start on DC side.
Ø Filter circuit to limit ripple.
Ø Charger current limiting
Ø Automatic voltage regulation using digital control logic.
Ø Input Voltage : 150V AC TO 270V AC
Ø Frequency : 47 TO 63 HZ.
Ø Input Protection : Soft Start.
Ø Inrush Protection : NTC.
Ø EMI Compliance : Inbuilt RFI/EMI Filter Provided.
Ø Efficiency : > 75-85%.
Ø Voltage : 13.7VDC
Ø Current : 5 A
Ø Regulation : ± 2% Line and Load.
Ø Ripple : < 1% PK-PK.
Ø Protection : O/P Over load & Short Circuit.
Ø Natural cooling.
Ø I/P TO O/P : 1.5 KV AC for One minute.
Ø O/P TO Earth : 1.5 KVAC for one minute.
NOTE: The pulsar can bring interference to other type of electronic circuits or gadgets, hence keep away any other electronic goods while operating / charging the battery with this unit