Maintenance and Calibration Tips for Laser Alignment & Leica Geosystems Beam Aligner 6770 Pipe Laser

Sept. 11, 2012 - PRLog -- Here are a few tips so you can keep your Laser Alignment, Inc. or Leica Geosystems Beam Aligner 6770, 6775 & 6790 pipe lasers running smoothly.

You can operate the Beam Aligner 6770, 6775 or 6790 by connecting the laser to a 12 volt battery, such as a car or truck battery (12 volt VDC power cable required).  Do not run the vehicle’s engine when the cable is connected.  This can result in major damage to the laser.

The rechargeable nickel metal hybrid battery pack assembly contains six capacity NIMH Batteries.  The battery pack is enclosed assembly.  Fully charged, the battery pack will power the Beam Aligner up to 30 hours.

The battery pack must be removed from the laser to be charged using the beam aligner 100v/220v charger.  The charger plugs into the charge jack on the back of the pack.  The battery pack will reach full charge within 8 hours.

Calibration - There is no set interval for calibrating the Beam Aligner 6700, 6775 or 6790 Pipe Laser, but calibration should be checked from time to time in order to ensure that the highest possible quality of work is being done.  Calibration should be checked if the laser has been dropped or mishandled.

Lasco Laser and Instrument Co. (lascolaser.com) can also help you keep your construction lasers and instruments working like new with regular maintenance and adjustment.

Lasco Inc. Laser & Instrument Co. is both a warranty and non-warranty repair center for many of the major laser and optical manufacturers.  Our repair department has been keeping your equipment in the field for over 30 years. Our experienced factory trained technicians can make sure you are ready to go when the job starts.  Don’t wait and find out the day before you need your laser or instrument that it is not working or out of calibration.  

About Lasco Laser & Instrument Company
LASCO Inc. has been serving the construction industry since 1975. We are the leading source for construction lasers, surveying instruments, automatic machine control systems and supplies for the entire construction industry. We are proud to represent names like Laser Alignment, Chicago Steel Tape, Leica Geosystems, Sokkia, Stabila, Agatec, David White, Pacific Laser Systems, and Crain to name just a few.

LASCO Inc. not only supplies the very best Laser and Instruments, but from our first day of business in 1975, it has provided the best in-house repair service in the world. We believe our service technicians are the best trained in the industry.
We provide both warranty and non-warranty in house repairs for most major brands of construction Lasers and Survey instruments offered on the market today.

For more information contact:
Dan Hill, Lasco Laser & Instrument Company
Toll Free (US/Canada): 866-374-5428 Tel: 616-949-5070 or DHill@lascolaser.com
Visit http://www.lascolaser.com or http://www.laser-measurement-tools.com tools.com .

Company Information:
Name: Lasco Laser & Instrument Company.
Address: 3220 Jefferson Ave SE
City: Grand Rapids
State: Michigan
ZIP: 49548
Phone: 616-949-5070
FAX: 616-949-2137
www.lascolaser.com
www.laser-measurement-tools.com