- Aug. 27, 2012 -
Newport Corporation, a worldwide leader in laser and photonic solutions that Make, Manage, and Measure Light®, introduces high-precision adjustment screws with a 170-thread-per-
inch (TPI) thread pitch, providing a 43% improvement in sensitivity over standard 100-TPI adjustment screws. The benefit of the 170-TPI adjuster is strengthened by the results of timed alignment testing where a mirror mount with these adjusters was consistently aligned within a band of +/- 3 μrad in about half the time as the same mount with 100-TPI threads.
High-precision 170 TPI stainless steel threads are mated with the collet and a proprietary lubricant to allow a full 0.5 in. (12.7 mm) of fine, stictionless movement. The standard 0.375 (9.5 mm) diameter collet is threaded with a nut for effortless mounting to optical mounts and stages.
The 170-TPI High-Precision Adjustment Screws are non-locking and are available with a knob or with a 5/64-in (2-mm) hex key.
For more information about Newport’s high-precision 170-TPI adjustment screws, go to www.newport.com/