NGX Technologies launches LPC1768-Xplorer, development tool for NXP's LPC1768 MCU

PRLog (Press Release) - Jul. 12, 2012 - LPC1768-Xplorer http://shop.ngxtechnologies.com/product_info.php?cPath=21_33&products_id=124 is a CORTEX-M3 based stamp board for NGX’s mbed-Xpresso Baseboard. The LPC1768 microcontroller has 512KB of internal flash and 64KB RAM. Ethernet MAC, USB Device/Host/OTG interface, 8-channel general purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C-bus interfaces, 2-input plus 2-output I2S-bus interface, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock (RTC) with separate battery supply, and up to 70 general purpose I/O pins

Following are the salient features of the board:

   Dimensions: 27x101 mm2
    On-board Test Led
    12MHz crystal
    25Mhz crystal for Ethernet
    32KHz RTC crystal
    On board USB Host / Device support
    On board Ethernet Transceiver
    On board dual port USB power switch and Over-current protection
    On board Micro-SD card holder
    On board 10 pin SWD
    On board reset switch

Kit Contents

   LPC1768-Xplorer evaluation board
   Micro USB Cable

Photo:
http://www.prlog.org/11922386/1