NGX Technologies launches LPC1830-Xplorer, development tool for NXP's LPC1830 MCU

PRLog (Press Release) - May 25, 2012 - LPC1830-Xplorer is a breakout board for LPC1830 cortex-M3 based microcontroller. The LPC1830 microcontroller has flash and flashless parts. For flashless microcontroller has 200KB SRAM, two 32KB SRAM blocks with separate bus. 64KB ROM containing boot code and on-chip software drivers. 32-bit OTP. For flash microcontroller 1MB dual bank flash, 136KB SRAM, Ethernet MAC, one USB 2.0  Device/Host/OTG interface with DMA support, one USB2.0 Host/Device interaface with DMA, on-chip full-speed PHY and ULPI interface to external high-speed PHY, 4 UARTS with DMA support, 2 C_CAN 2.0B, 2 SSPs, 2 I2C, 2 I2S, LCD controller, 8 GPDMA, up to 164 GPIO, 1 10-bit DAC, 2 10-bit ADCs, and RTC.

LPC1830-Xplorer http://shop.ngxtechnologies.com/product_info.php?cPath=21... has been developed in partnership with NXP semiconductors Inc.

Salient features of the board include:

   Controller: LPC1830, 100 pin BGA
   PCB: 4-layer (86mm x 40mm, RoHS Compliant)
   Two LEDs
   One user switch and one reset switch
   Boot select switch
   32Mb Quad flash
   On board crystals for controller, RTC and audio codec
   On board Ethernet PHY, 50 MHz Oscillator and RJ45 connector with magnetics
   On board audio codec and audio jacks
   On board USB host power switch
   On board Micro SD card slot
   Two USB ports, one HS (High speed) port and one FS (Full Speed) port
   10-pin cortex debug header
   Unused I/Os brought to a header

Kit Contents

   LPC1830-Xplorer Evaluation Board
   1 meter USB AM to Micro B
   0.2 meter USB AF to Micro B

User Manual

Schematic

What tools to use?

   KEIL uvision4 IDE a 32K code limited version could be used
   LPC-Xpresso

Sample Code

   Keil&LPC-Xpresso

For any technical queries about our products you can post your query at http://forum.ngxtechnologies.com/