Basement Waterproofing | Everdry Atlanta

Feb. 9, 2012 - PRLog -- Basement Waterproofing Solution 1:  Total Excavation: In this method, the contractor uses a backhoe to dig around the outside of the home’s foundation all the way down to the footing. After the wall is completely exposed, the original footer tiles are checked and, if needed, replaced. The wall is then sealed with waterproofing materials, such as tar and plastic. Gravel is poured over the pipe and the dirt is replaced in the hole. Visit http://www.everdryatlanta.com today for more details.

Basement Waterproofing Solution #2:  Interior Systems: Inside drains may be used to waterproof from the inside of the basement. Typically, this involves opening the floor around the perimeter of the basement, digging a trench, and installing pipe and gravel around the footer. The contractor also installs 'weep-holes'—small, one-half- to three-quarter-inch holes in each block cavity—to release any water that may be trapped. The holes are covered with a plastic molding or styrene panel before the floor is re-concreted. Visit http://www.everdryatlanta.com today for more details.

Everdry Basement Waterproofing Solution:  Multi-Step System: Visit http://everdryatlanta.com for this solution!