LPC1768 HPLUS EX
-----------
LPC176x HPLUS Ex is an extension board for LPC176x HPLUS Board with Cortex M3 core microcontroller (LPC176x). This board has connectivity options similar to that of HPLUS Board which include Micro SDCard, Ethernet, USB Host/Device, 3.2inch TFT connectivity option, JTAG etc. Along with these features, the Ex Board has additional features of two RS232 interface plus a connectivity option for 128x64 Graphical LCD.
More information about this products, please refer to:
http://coineltech.com/
The display connectivity option is available for the following display units.
Graphical LCD Connectivity
-------------------------------------
Model: TM12864H6CCOWA
Driver IC: NT75451
Data Interface Parallel
Number of Pixels: 128 x 64
3.2inch TFT Connectivity
---------------------------------
Model: KWH032GM02-F05
Driver IC: SPFD5408 / ILI9325
Interface : SPI.
Number of Pixels: 240 x 320
You can buy the TFT displays from the following links below
http://coineltech.com/
http://coineltech.com
Demo on this board as follows
1. LPC1768 HPLUS Ex Description
http://www.youtube.com/
2. CoiNel LPC1768 HPLUS EX Demo using Segger emWin Graphical Library
http://www.youtube.com/
You can buy the Graphical LCD from the following link
http://coineltech.com/
There is also an option for the customer to buy an LPC176x HPLUS Ex All in One package. Which include LPC176x HPLUS EX Board, 3.2 inch TFT with Touch and a graphical LCD.
You can buy the All in one package from the following link.
http://coineltech.com/
Features of LPC1768
Best in class Cortex M3 Hardware.
100 MHz ARM Core with 64 KB of SRAM and 512 KB Flash.
8-channel general purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C interfaces, 2-input plus 2-output I2S interface, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power RTC with separate battery supply, and up to 70 general purpose I/O pins.
LPC176x HPLUS Ex Features
USB Device and Host Connectivity Options.
Ethernet with DP83848 PHY MAC.
SDCard (Micro) Interface.
RS232 Interface for UART0 and UART3
Analog input via ADC0.5
Unused I/O pinouts.
OnBoard Reset and ISP Switches.
On Board Power Supply Circuit for +5V and +3.3V (USB or external Power Source input options)
On Board 12 MHz Clock
32.768 KHz Clock for RTC.
Option for a CMOS Battery.
Onboard 20 pin JTAG connector for debugging/programming applications.
On board TFT Connector for 3.2inch TFT (with touch and without touch).
On Board Graphical LCD Connector.
LED for Power Supply, USB, Ethernet and Test LED.
Board Dimensions: 90.4 x 86.1 mm
Board Specifications:
Laminate: FR4
Board Thickness: 1.6mm
Finish: ENIG
Photo:
http://www.prlog.org/
