RMS Gas Pump Interface Meets California ISD Requirements

Aug. 10, 2011 - PRLog -- LAS VEGAS, NV, August 10, 2011 -- Fuel management systems provided by RMS Retail Marketing Solutions, Inc. meet all requirements for ISD in the state of California.

"In-Station Diagnostics" (ISD) systems are required in California gas stations, to monitor fuel vapor recovery equipment.  They connect with existing vapor leak monitors on underground fuel tanks, identify failures automatically and notify the station operators.

Similar requirements may take effect in other states in the near future.

This system works with the Automatic Tank Gage (ATG).
• It sends status information to the ATG for inventory and leak detection reports.
• It provides notification of the start and end of each sale.  Information on each sale transaction is fed to the Veeder Root ATG using the “Environmental Management Console” (EMC) protocol, emulating Gilbarco’s G-Site POS solution.
• This enables the ATG to directly turn the pump off immediately, if it detects an issue with vapor recovery.  

The RMS solution will work with all major brands of fuel dispensers.  It can also manage a mix of brands and types of dispensers including mechanical and high-speed units.  Contact us about your site’s configuration.

The Gas Pump Interface (GPI) solution is provided by RMS in partnership with Progressive International Electronics (PIE, Inc.) of Knightdale, NC.  It can be installed in gas stations, convenience stores, unattended cardlock sites, airports and marinas.  It can also be scaled in size from single sites to large chains.

This solution has been integrated with a number of major point-of-sale systems for the retail fuel market, and with marina management systems.

To learn more about RMS solutions, visit www.rmssoftware.com .  To learn more about PIE, visit www.pie-corp.com .

# # #

About RMS Retail Marketing Solutions, Inc.
RMS is a privately owned innovative developer of business software solutions. Incorporated in 1993, RMS has offices in Calgary, AB and Las Vegas, NV. For more information about RMS, its products and services visit RMS at www.rmssoftware.com or contact a sales representative at info@rmssoftware.com.