Other advantages of fiber optic transmission

July 8, 2011 - PRLog -- Light is confined within the core of the optical fiber through total internal reflection. To understand the phenomenon of total internal reflection and how it is responsible for the confinement of light in an optical fiber, we will take a look at the ray theory (a ray of light incident on the fiber core).

Light enters the core of the optical fiber and strikes the core/cladding interface at an angle. If this angle is greater than the critical angle, then the ray will reflect back into the core thus experiencing total internal reflection. This ray of light will continue to experience total internal reflection as it encounters core/cladding interfaces while propagating down the fiber.

Fiber optic holds an advantage over copper media in its ability to handle high-speed signals over extended distances. Other advantages of fiber optic transmission include:
http://www.fiberise.com Fiber optic components

1. Higher bandwidth. Fiber has higher bandwidth than any alternative available.

2. Immunity from Electromagnetic (EM) Radiation and Lightning. Since optical fiber is made from dielectric (nonconducting) materials, EM radiation does not affect optical fiber.


3. Lighter weight. In real world applications, lighter fiber optic cables routinely replace heavier copper cables.


4. Easily upgraded. The limitation of fiber optic systems today, and for years to come, is the electronics and electro-optics used on each end of the fiber.
http://www.fiberise.com/fiber-patch-cables Fiber Patch Cables

Structure of Optical Fiber

The optical fiber is made up of two concentric cylindrical strands of silica surrounded by a plastic coating.

The center most silica strand is the core of the fiber with a refractive index of approximately 1.48. The core of the fiber physically transports most of the optical power.

The core is surrounded by another strand of silica called the cladding. The cladding has a slightly lower refractive index, 1.46 and provides the interface that confines the optical signal to the core.
http://www.fiberise.com/cisco-sfp Cisco SFP
The outermost layer of the optical fiber is the buffer coating. This thin plastic covering protects the glass from mechanical and environmental damage.

Multimode fibers have larger cores that guide many modes simultaneously. The larger core makes it much easier to capture light from a transceiver, allowing source costs to be kept down. Similarly, multimode connectors cost less than single mode connectors due to the more stringent alignment requirements of single mode fiber. Multimode connections can be easily performed in the field, offering installation flexibility, cost savings, and peace-of-mind.
Large core fiber is attractive due to the ease in which light from a source can be coupled into the fiber, significantly reducing the cost of transmitter design and packaging. Multimode fiber is very sensitive to dispersion, which tends to limit the distance and bandwidth of an optical system.

Enterprise environments present particular network challenges, including limited spaces and tight bends, high connection density, and components that get handled frequently. Multimode fibers are ideally suited for these conditions. And since distances within a premises system rarely approach 550 meters, multimode fiber should be the choice for these applications.

The network designer or end user who specifies multimode fiber for short reach systems still must choose from two types – 50um or 62.5um. Today, 50um laser-optimized multimode (OM3) fiber offers significant bandwidth and reach advantages for most building applications, while preserving the low system cost advantages of 850nm based multimode fiber.

# # #

Fiberise is a professional supplier for fiber optic components and network equipments such as optical transceivers, fiber patch cords, fiber optic adapters, connectors, attenuators, media converters, test equipments, fiber optic tools and accessories.