During the lull in the road bike market from the mid eighties until the turn of the century, models were dominated by bikes with aggressive, race-oriented geometry. Steve Bowen, owner of PV Bicycle Center in Rolling Hills Estates has followed the trends as an enthusiast and a participant in the industry: "This trend in frame geometry was exaggerated by two trends: longer top tubes on road bikes became the norm with American manufacturers who were capitalizing on the success of pro cyclist Greg LeMond, and the use of threadless headsets which had a lower stack height than the older, threaded models. These two factors made the front ends of most road bikes too low and too long, leading to discomfort, especially on longer rides. The trend helped facilitate the rise of the hybrid bike market. Hybrid bikes used shorter top tubes and taller head tubes. This gave greater comfort in the short run, but the hybrids were inefficient and heavy compared to road bikes."
In 2003, Specialized Bicycle re-introduced a bike that they had made for a few years in the early 1980’s – the Sequoia. The original Sequoia was a lugged steel bike with sport touring geometry. This allowed for use of racks, fenders and wide tires, but without the add-ons and with a 23 or 25mm tire the bike was light, responsive and fun to ride. The new Sequoia was made from an aluminum frame with a carbon fiber front fork. You could put racks on it but there wasn’t enough clearance for fenders or wide tires. According to Bowen, "Strong sales of the new Sequoia demonstrated that there was a market for “endurance road bikes” as Specialized called them. Here was a bike that was comfortable, relatively light and had a shorter top tube and longer head tube than most other road bikes of that time. The Sequoia was ideally suited to century and club rides, or touring if you didn’t have to carry your own gear."
Everything changed with the introduction of the revolutionary Specialized Roubaix Series. Capitalizing on the success of the Sequoia, Specialized introduced the bike that changed the industry: The Roubaix. The Roubaix, which took its inspiration from the famous Paris-Roubaix race (run over many sections of uneven cobblestone)
Bowen does most of his riding near his shop in the hills of Palos Verdes Peninsula. "It is hard to imagine a more beautiful place to ride. The ocean views are nothing shore of spectacular, and the residential streets are wide and don't have much traffic. With steep hills, there is ample opportunity to test the full range of gears on my Roubaix.
"So, it was pretty exiting to see the changes that arrived in the 2009 model year. Specialized did something extraordinary:
And indeed, Specialized's efforts paid off with the Roubaix coming full circle to its original inspiration:
"Then," explains Bowen, "Specialized upped the ante for 2011. The 2011 Roubaix saw a number of startling changes. The S-Works Tarmac had been upgraded to a new frame technology, dubbed SL3, for the 2010 model year. This construction method created the frame in four parts: the top tube/head tube/downtube section was made in a single unit. The seat tube was a separate unit, as were the seat stays. The bottom bracket area, chain stays and a short lug to connect the seat tube and down tube were fashioned as one piece. This gave the Tarmac best-in-class bottom bracket and chain stay stiffness, the part of the bike where torsional flex would waste the most power. And it allowed the bike’s engineers to build in vertical compliance in the seat stays and top tube, to give the bike a ride.
"The 2011 Roubaix got this innovation, plus a few more. The Cobra head tube wrapped some fibers from the top tube and down tube around the front of the head tube, widening the top and bottom of the head tube as well as the connecting ends of the top tube and seat tube. This stiffened the head tube junctions for quicker, more predictable handling with less material, saving weight and maintaining the vertical compliance of the top tube."
Also for 2011, the Roubaix gained internal cable routing plus redesigned fork and seat stays. The Zertz inserts were no longer all the way through the carbon. They fit into a concave section in each area, maintaining the vibration-damping properties as before while also making the fork and seat stays torsionally stiffer for better power transfer and handling. Bowen saved the best for last. "Perhaps the boldest innovation of all: the Pro and Expert models of the Roubaix also gained SL3 construction and internal cable routing, bringing the technology that one year earlier had been available only on S-Works bikes costing upwards of $8,000 to models starting at around $3,500. Also, the entry-level Roubaix Elite at under $2,000 and Roubaix Comp at about $2,600 were given SL2 framesets. Talk about trickle-down!"
So what does all this bike geek-speak really mean to the average cyclist? It means that now, almost any rider can get a bike that is super-light, super-fast and super comfortable. The Roubaix handles like a dream, accelerates quickly and maximizes rider power and comfort. It can flatten hills, shorten century rides and make road biking a true joy for beginners, elite riders and professional cyclists alike. That’s a pretty impressive achievement for a bike that defined a whole new category just seven short years ago.
# # #
Steve Boden is the owner of PV Bicycle Center ( http://www.PVBike.com ). The shop is recognized as one of the premier shops in the nation for Specialized road bikes. Some call his shop the Nordstroms of bicycle stores.
The shop is located at the top of the hill in Palos Verdes Peninsula at the corner of Hawthorne Blvd and Silver Spur in the Peninsula Shopping Center. Take the Hawthorne exit off the 405 freeway and driving the 10 minutes or so to the shop. The last 5 minutes of the drive takes you through beautiful horse country. Or access the shop off the 110 or from the beach along PCH or Sepulveda.
PV Bicycle Shop is also known for its professional fitting studio. With the latest in video and computer programs from Specialized BG fit, Steve is well known as an expert at properly fitting rider to bike to increase speed, power, stamina, and reduce potential injuries.
Also check out the blog at http://www.PVBicyclingCenter.blogspot.com
Call Steve to learn more (310) 377-7441