Purchase Of Non-original Laptop Battery Must Know The Knowledge

PRLog (Press Release) - May 10, 2010 -
Purchase of non-original laptop battery must know the knowledge
Of non-original laptop battery is composed of roughly three parts: batteries, PCM plates, shell. A battery is to see whether the major and lasting batteries, so if you want to buy laptop battery, if batteries begin to look at it is not imported, because the better the quality of imports, and later to look at its security, there must be secondary protection, because the secondary protection is essentially to prevent the occurrence of an explosion, of course, to be built on the basis of batteries no problem, if the batteries in question, then the other things that no matter how good it is. There are batteries inside the insulating material is also very important, if the insulation failure, it is likely to lead to short-circuit batteries, so even if there are secondary protection, are more dangerous, so should be high temperature resistant insulating material, it is best that they do not want to fire As for the batteries were defective. For the PCM board, the most important is the program is compatible with the computer, which requires original laptop to test, but this is costly for manufacturers, so manufacturers generally will not do. Laptop battery casing material composition preferably also by the fire, so that will withstand high temperatures of the components inside the battery also has protective effects.
The proper use of laptop battery

1. Activation: For just purchased laptop battery, we usually want to activate the battery operation, since the new batteries may be only a few remnants of power, need to set an initial battery charge. In the off state, charge, charging time is greater than 6 hours; in the boot state, charge, charging time is greater than 8 hours. This process, do not disconnect the external power supply, the first three to use battery power when you're all used up a further charge, and the charging time can not be less than the first time, charge time, in order to ensure maximum http://www.laptopbatteries-shop.com/acer/travelmate-5320.htm  is activated to ensure the effective battery use of time.

2. Storage: If you do not have the battery can be removed a long time, but it must ensure that the battery has 40% of the electricity, because the battery will be placed on a daily loss of about 1% of the electricity, this is aimed at preventing battery over-discharge result in damage, Battery power is also out of the factory with a I take this into consideration. In addition, every month or so to conduct a full battery charge and discharge, to ensure that lithium-ion activity are not lost. Some models have a battery pad, playing the role of supporting laptop, remove the battery will cause the machine imbalance, on this point there is no good solution. However, netizens can, through their own DIY pad to achieve the same functionality.

3. Use of the environment: Try not to use the laptop battery under high temperature conditions, in the case of high temperatures shorten battery life laptop would be more serious, and even, there will be a risk of explosion, and we try to avoid extremely high or low temperature environment, the use of not only extends laptop battery life, laptop batteries also have no small help.

4. Special circumstances: Basically speaking, laptop battery explosion probability is not high, so we did not need to have more concerns about laptop explosion, but we in the course of normal use, we should note that, if the laptop batteries overheating, or expansion deformation, it should be removed immediately stop using the laptop battery in normal use because of the process, there will not be too high temperatures, basically a warm feeling, if the calories are relatively high, the battery inside the heat accumulation occurs case, which is more dangerous. http://www.laptopbatteries-shop.com/sony/vgp-bps9.htm

Photo:
http://www.prlog.org/10670053/1