Some types of mobile phone batteries, we can point texture according to whether or not the hard way to identify genuine and fake batteries. Force pressing the dome-shaped cell phone battery point, and directly with your fingers and feel the soft and hard levels of the conjugate point. Often, a combination of genuine mobile phone batteries are relatively soft texture of a number of points, but also show some flexibility, especially in the battery when inserted into the phone, there is a smooth non-blocking, insert the comfortable feeling, and elastic fit, and cell phone with a very harmonious, locking and stability; on the contrary, poor battery relatively hard texture a little more, and the battery installed, not very easy to "slip" into the cell phone battery slot.
5 See Charging Effects
In general, the superior performance of the cell phone battery, an internal over-current protection device, once the external short-circuit the phone, give rise to significant impact on current, the overcurrent protection device can automatically cut off the charging circuit in order to avoid cell phone batteries due to high current the impact of the phenomenon of the event of damage or burning. The bad battery is likely that there is no over-current protection devices; this lengthy battery charging, the battery shell may appear the phenomenon of boiling, the worst case, smoking behavior may occur. If the battery charge did not take long, hot phenomenon appeared, then the likelihood, the battery is defective.
The need to remind consumers that the mobile phone battery warranty should be at least six months, during which the event of quality problems, you can contact the dealer asked for returned.
Mobile phone battery maintenance knowledge
1. In order to extend battery life, IBM 08K8194 Battery, IBM 08K8196 Battery, IBM 92P1102 Battery , battery charging time is normally no more than the necessary charging period (5-7 hours).
2. Purchase only when the first wife of the charger manufacturer.
3. The battery contacts are not with the metal or contact with grease fittings,IBM 92P1102 Battery , pay attention to moisture.
4. Do not dip the battery in water or throw in the fire.
5. Do not put the battery on the low side or high-temperature objects, such as refrigerators and stoves.
6. Dealing with the battery, please use the special facilities.
7. To replace the battery, use only approved battery type of phone.
8. For memory effect of battery, each battery should be used up, and then recharge. Otherwise, the battery memory effect occurs, greatly reducing the battery life.
9. Battery life is based on charge-discharge cycles to calculate and, therefore, adequate electricity, run out of power, maximize battery life
