Linear motion double shale shaker
GN Solids control updates many items model number and a few parameters, make the whole system more easy understanding and compact. GNZS Shale shaker is new model of ZS Shale shaker from GN solids control, mainly including 4 common models. However, the shale shakers can be customized according to clients' requirement
http://www.gn-
At present, GN hold both linear motion shaker and balanced elliptical shale shaker.
The following one is first class solids control equipment---shale shaker.
GNZS Shale Shaker Technical Parameters
Model GNZS83-3 GNZS63-3 GNZS70-3 GNZS83-2
Vibrating Mode Linear motion
Motor Power 2×1.8/
Vibrating Strength ≤7.0G(Adjustable)
Double Amplitude 5.5~6.0mm
Treating Capacity 140m3/
Deck Adjustment -1°~5°
Power 380V/50HZ,460V/
Screen area 2.7m2 2.4m2 2.2m2 1.8m2
Screen830×1080mm×
Remarks Treating capacity test from mud:1.2g/cm3density & viscosity 45s & 40 mesh screens
Shale Shaker for drilling returns processing system:
http://www.gnsolidscontrol.com/
Shale shaker for solids control are devices that remove drill cuttings from the drilling fluid while circulating and drilling. There are many different designs and research into the best design is constantly ongoing since solids control is vital in keeping down costs associated with the drilling fluid.
This separates the drill cuttings, often called solids, from the drilling fluid so that it can be recirculated back down the well bore.In oilfield industry,linear motion shale shaker are widely used for drilling mud solids cotrol of oil gas well drilling for rig.
http://www.gnsolidscontrol.com/
The basic design consists of large, flat sheets of shaker screens or sieves of various mesh sizes that shakes or vibrates the drill cuttings, commonly shale shaker, across and off of the screens as the drilling fluid flows through them and back into the drilling fluids processing system, often called a mud system.
