Installing an air ride suspension system inside a car is a powerful way to customize an automobile so that it could easily support changing load demands. Air ride suspension systems are better to decide on than regular air shocks these aren't which is designed to carry any additional load. Their main purpose is always to dampen the suspension movement only.
Decide if you wish to replace both front and rear suspension systems by installing an air ride suspension system within your car, or if you need to only replace a back corner.
Remove completely the existing suspension system. You will discover directions concerning how to make this happen inside the car's owner manual. You possibly can dispose of or recycle every one of the original components.
Install top of the 1 / 2 of the assembly along with the lower portion belonging to the air spring support. Install the environment fitting, you'll be able to arrive at work attaching leading air springs. Tighten the nuts that include the kit to secure the cross shaft towards the upper control arm.
Repeat Steps 2 and 3 for that other wheels. You will need to repeat this for three more wheels if you're changing the leading and back suspension systems, or for starters more wheel in case you are only installing a rear air ride suspension system as part of your car.
After some research, we settled on the new air suspension system from Air Ride Technologies that works at all four corners of the vehicle. This setup is not a half-baked solution like regular air shocks, and the whole suspension can be adjusted from inside the car at the touch of a button. Dual on-board compressors and an air storage tank make it possible.
In fact, the Air Ride system does away with the springs on the car entirely, replacing them with a carefully designed arrangement that can be adjusted at each corner of the car independently. At the back axle, the leaf springs are replaced by upper and lower trailing arms in a configuration similar to that found on many modern cars. The front suspension loses the coil springs, and the entire weight of the front end is supported by the Air Ride Technology air springs.
