10.4 Inch LCD Touch Screen Monitors
I. Introduction
With LCD monitors and CRT monitors last year, the price of war, currently on the market CRT display market has entered the mainstream of 17-inch flat-screen era, the various manufacturers in order to be able to better capture the market one after another to improve their production processes and production technology, as time went on, the current 17-inch flat screen monitors not only the best quality, but prices are relatively cheap, generally in the 1,500 yuan to 2,000 yuan. At this point, buffalo monitor horizon, launched a series of high-quality low-cost 19-inch flat-screen monitors, favored by many users, so, in the display market set off a burst of buying 19-inch big screen trend . Today, we are on the large-screen displays used in note to give you a detailed introduction. http://www.super-
Second, the use of large-screen displays Attention
Among the many computer accessories, monitors the speed of renewal is slow, ranging from four, five months longer to spend eight or ten years are also no problem. Of course, that the maintenance and use of the process are inextricably linked. In fact, one monitor is vulnerable, including temperature, humidity, dust, electromagnetic interference, electrostatic and other environmental factors, which will be on display to varying degrees of damage. Therefore, the correct use of displays, note that monitor the daily maintenance and maintenance, is to determine its "long life" or not an important factor, particularly now that the 19-inch display, effemination not say heat than the 17-inch display large, therefore, We should pay attention to the more usual maintenance.http://www.super-
Humidity and temperature to monitor the impact is relatively large. When the environment in general more than 80% humidity when the display will be generated within the condensation phenomenon, it is likely to cause display of internal power supply transformers and other coil moisture resulting from leakage phenomenon, and the display ignition coil in the case of excessive humidity is also very is easy to produce discharge phenomenon, the machine may also be other components damp rust, corrosion, severe cases will board a short circuit. If the humidity below 30% of time, because the environment is too dry, static displays inside are also easily interfere with the internal components have been increased possibility of electrostatic damage, especially the ignition coil and, if static interference is too serious, will have physical damage. The impact of temperature for the display, we all should be very aware that the heat tube as a large display, if the temperature is too high, if the work environment, some cold solder joint to solder joints is likely caused by solder melted open, ranging from affecting the display normal work, heavy short circuit occurs while the burning of other components. And the high temperature will speed up the aging of various components, the speed, long-term high temperature operation will shorten display life. Therefore, you should keep the temperature of use of the environment not too high, but humidity should be maintained at between 30% -80%.
In addition, dust and magnetic field for the display of injury is very serious. Monitors at work, it is very easy to attract a solid suspended particles in the air, these small particles on a big threat display, if the dusty and long-term work environment, monitors the internal printed circuit board would be a lot of dust absorption, these dust will affect the accumulation of more electronic components cooling, the temperature is too high leakage phenomena arises burned components, but the dust can absorb moisture, corrosion monitors the internal electronic circuits. The excessive electromagnetic interference will display color images creates distortion, although it is very convenient to monitor degaussing, but the long run, the damage to the tube is very big. Therefore, you should try to avoid displays and televisions, refrigerators, audio and other large electrical devices are too close, the environment should also be kept clean to reduce dust intrusion.http://www.super-
Third, sum up
In addition to the above mentioned, a number of accidental or man-made factors that also affect the display of life, such as the voltage instability, power outages, there are many people like to operate a computer side, the side to the display screen or to spit smoke ring brightness set too high, the display life of these will be more or less damage. Monitor the prices of computer accessories in the considered partial expensive, and in particular the 19-inch big screen, so you should be in daily use process more attention to maintenance and maintenance.
Photo:
http://www.prlog.org/
