M3i Zero Guide,M3i Zero Upgrade
Step by step guide to let your M3i zero upgrade process,(From zero to infinity):
M3i Zero Sakura Card Upgrade process:
(From zero to infinity)
i) For the first time to upgrade:
Step 1: Copy files
Format TF(microSD Memory card) first.
Note: Drive Letter may vary
Copy the “system” folder and the “f_core.dat”
Step 2: Plug cable in
Insert the thin cable part of the power supply cable into the power socket of the M3i Card. And insert the USB plug into the USB socket of the computer. If everything is going right, the LED inside of the M3i Zero will start blinking. The LED will blink for about 30 sec and then automatically turn off (once the blinking stops, it indicates that the process is completed).
1. (Insert the Micro SD Card into the M3i Zero Flash Card)
2. (Take the thin cable and inert it into the M3i Zero Flash Card.)
3. (Connect the cables together.)
4. (Insert the USB cable into a USB port from the computer)
Note:
LED blinks - in progress
LED lights off - no power or complete
LED lights on - error (no “f_core.dat”
*** Usually users may only need to do this step once as the data of “f_core.dat”
Buy M3i Zero Card here: http://www.r4ds-
Step 3: Plug & Play
Just insert the M3i Zero into Nintendo DS, DSl or DSi console and enjoy it.
*(Users may also copy the games, media files or homebrew applications onto Micro SD memory card too.)
ii) For users who have upgraded the flash core (f_core.dat):
1: Copy files
Copy or replace the “system” folder onto the root directory of the Micro SD memory card.
*(Users may also copy the games, media files or homebrew applications onto Micro SD card as well.)
2: Plug & Play
Just insert the M3i Card into Nintendo DS, DSl or DSi console and enjoy it.
Source:
http://www.r4ds-
Photo:
http://www.prlog.org/
