Before you set up cleaning your Acer Aspire 4330 laptop Keyboard http://www.hootoo.com/
After the above-mentioned things have been prepared, it is time for you to begin to do the cleaning work. First of all, it is strongly recommended that you'd better make a keyboard map in order that you will get to know which place each key will go. Then you need to very carefully pry each key loose with a small screwdriver and place the keys in a fixed container. At this point, there is one thing you need to follow. That is, do not use too much force because there may be a small rubber piece for every key. Remove all of them and place them in a separated container.
Then it is time to clean the keyboard with cotton swabs and water gently. Replace these several times to make sure that they are just slightly damp. If they are too wet, the left water will contaminate the keyboard which will clean all water soluble contaminants. For the very small places, cut the foam rubber into small pieces and use the tweezers. You must clean each key space. This step is crucial. Repeat this step once again using rubbing alcohol and cotton swabs. Finally repeat this procedure using naptha and foam rubber. With this method you can even clean the smallest key guides with small pieces of foam rubber and tweezers. This action will remove any petroleum based contaminants as well as the grease that is sometimes used on the wider keys which may have guide wires, for example, the SCACE BAR.
For any other Keyboard http://www.hootoo.com/
