stm32f107 board
The ST STM32F107 ARM-CM3 board (STM3210C Board) is used STMicroelectronic's ARM Cortex-M3 core based STM32F107VCT microcontroller, operating at up to 72MHz frequency, integrates a wide rang of peripherals, such as USB OTG, USB Host, Ethernet, two CAN interfaces, microSD card and smartcard interface, TFT LCD interface, three JTAG Debug interfaces, etc. The plenty of software resources which can be used in RealView MDK environment will help you better debug and develop your project.
Hardware Features
Processor: STM32F107VC, based on ARM Cortex-M3 Core, 72MHz
Memory
On-Chip Memory: 256KB Flash & 64KB RAM
External Memory: 8KB I2C Flash
LCD: 2.4" Color QVGA TFT LCD Panel with touch screen, 240x320
1 x RS232 Interface
2 x CAN Interfaces
1 x USB Interface
1 x 10/100 Ethernet Interface
1 x TFT LCD Interface
1 x MicroSD Memory Card Interface
1 x JTAG Interface
4 x Push buttons (Reset, Wake Up, Tampering, User)
1 x Joystick (5-position)
1 x RTC with back-up battery
1 x Analog Input (connected to potentiometer)
1 x Analog Output (connected to speaker by default)
Board Size:110mm x 140mm (4.33" x 5.5")
Supply Voltage: 5 Volts DC (provided by the USB bus of a PC)
Supply Current: 180mA typical, 200mA maximum
XTAL Frequency: 25 MHz
More info: http://www.embedinfo.com/
Photo:
http://www.prlog.org/
