Fluids circulation system
Flowing system is one from Russian counterparts who is professional drilling mud processing equipments and system also.
Fluids circulation system: http://www.gnsolidscontrol.com/
Assignment
It is intended to reduce demand for water during drilling operations due to the regeneration of spent drilling mud and Abbreviations of disposal of drilling waste to be, improving environmental hygiene to the drilling by eliminating the waste discharge of drilling mud into the environment.
The scope of the system includes:
setting for rough cleaning
setting for fine purification
installation for pumping
installation for the chemical amplification purification
1. Shale shaker
Specifications
Productivity, m3 / 20
Working area of one grid panel, m2 0,97
Number of survey panels, pc 3
The minimum size for removal of particles, mm 0,2
Type of drive motor AIM100 4 kl 45 TU 16.525.666-86
Power consumption in the established mode, kW 3
Speed, rpm 1500
Electrical performance of explosion-proof equipment
Climatic performance UHL kat.3 UQ GOST 15150-69
Terms of Use indoors at a temperature of not less than +10 ° C
Size dimensions:
length, mm 3300
Width, mm 2400
Height, mm 2200
Mass transportation systems, not more than 2500 kg
2. Centrifuge
Specifications:
Productivity, m3 / h at least 25
Drive type electric
Regulating the speed of the drum in the range 0 ... 300 rpm bezstupenchatoe, hydraulic
KPT:
Nominal input shaft speed, rpm 3000
Slipping in the derivation scoop 1,8
Working fluid turbine oil TP22 "C" GOST 9972-74
The volume of working fluid, l 40
Regulation of difference in speed of rotation of the drum and screw rpm range ... 0 ... 90
Supply voltage, V 380
Frequency, Hz 50
Installed power, kW 57
Electrical performance of explosion-proof equipment
Climatic performance UHL cat. 3 Io GOST 15150-69
Terms of Use:
indoors at a temperature not below +10 ° C
The overall dimensions of the centrifuge:
length, mm 3200
Width, mm 2145
Height, mm 2100
The size of the drum with the gearbox, mm, not more than 2600
Weight centrifuge, kg, not more than 3600
Weight of the drum, kg, not more than 610
3. Sand pump http://www.gnsolidscontrol.com/
Specifications:
Screw type pump
Productivity, m3 / h 8-15
Pressure, MPa (kgf/cm2) 0.1 (1)
External leakage through the seal, m3 / h (l / h), no more than 5x10-4 (0,5)
Conditional flow area truboporovodov (DM), 125 mm
Motor power, kW 7,5
Parameters supply:
frequency, Hz 50
voltage, V 380
sort of a current variable
Dimensions:
length x width x height, mm 3065h810h943
Weight, kg, not more than 900
Indicators of applicability of the drilling fluid from the wells:
density, kg/m3 1050-1350
viscosity (viscosimeter on VM6), sec 17-60
maximum size of particles, mm 0.83
maximum concentration of suspended particles by mass,% 10
acidity, pH 5-5,5
4. Block of chemical amplification centrifuges
Block of chemical amplification centrifuges
Used in drilling technology bezambarnogo, installed on the mobile units in the complex means of cleaning mud from the cuttings before the centrifuge
Suitable for clean (clear) water and set in a complex means of cleaning mud from the cuttings and gas to block regulation of the solid phase (centrifuges)
reduce the amount of waste requiring disposal, by 70-90%
reduce water demand by 50-70%
Modification 1
Specification:
Expenditures:
mud, l / min 110-150
water to dilute the solution, l / min 20-40
coagulant, l / min 0,38-4,5
flocculant, l / min 0,38-7,6
acid, l / min 0-0,7
Explosion Class:
workshops in-1a
In-room laboratory 1b
Set of laboratory equipment for determining the parameters of drilling fluid supplies the customer
Calculated temperature in the room at an ambient temperature of -45 ° C, ° C +18
Total installed power, kW 22
Supply voltage, V 380
Continuous mode
Dimensions, m 10,29 x2, 44h2, 59
Weight, kg 9500
Modification 2
Specification:
Expenditures:
mud, l / min 110-150
water to dilute the solution, l / min 20-40
coagulant, l / min 0,3-0,5
flocculant, l / min 0,3-10
acid, l / min 0-0,7
Explosion Class:
workshops in-1a
In-room laboratory 1b
Set of laboratory equipment for determining the parameters of drilling fluid control supplies the customer http://www.gnsolidscontrol.com/
Calculated temperature in the room at an ambient temperature of -45 ° C, ° C +18
Total installed power, kW 20
Supply voltage, V 380
Continuous mode
Dimensions, m 8,62 x2, 38h2, 38
Calculated mass, t 9.0
Modification 3
Specification:
Expenditures:
mud, l / min 150-200
water to dilute the solution, l / min 20-40
coagulant, l / min 0,4-5,0
flocculant, l / min 0,4-10,0
acid, l / min 0-0,7
Explosion Class:
workshops in-1a
In-room laboratory 1b
Set of laboratory equipment for determining the parameters of drilling fluid supplies the customer
Calculated temperature in the room at an ambient temperature of -45 ° C, ° C +18
Total installed power, kW 18
Supply voltage, V 380
Continuous mode
Dimensions, m 5,0 x2, 38h2, 38
Calculated mass, t 8
You maybe interested in other different fluids system content. Browse here: http://www.gnsolidscontrol.com/
Photo:
http://www.prlog.org/
