Fiber Connector, ST, FC , SC , LC, MU, FDDI, E2000
The Fiber Connector is one of the most essential components for optical communication. It mate or connect with optical devices, modules, and fibers. Fiber connector is also the key part used in fiber fiber patch cord and fiber Pigtail.
While there are many different types of fiber connectors, they share similar design characteristics. There are three major components of a fiber connector: the ferrule, the connector body, and the coupling mechanism.
http://www.twfiberoptic.com/
Ferrule —Two main Ceramic Ferrule sizes are used for Fiber Connectors. The ferrule OD size φ2.5mm is for ST, FC and SC Fiber Connectors. The ferrule OD size φ1.25 mm is for the MU and LC Fiber Connector Versions. PC or UPC or APC refer to how we polish the ferrule of the Fiber Connectors. Single mode fiber connectors can be with PC, or UPC or APC polish, while Multimode Fiber Connectors only with PC or UPC polish.
Connector body — this is a plastic or metal structure that holds the ferrule and attaches to the jacket and strength members of the fiber cable itself.
Coupling mechanism — this is a part of the Fiber Connector body that holds the Fiber Connector in place when it gets attached to another device. It may be a latch clip, a bayonet-style nut, threaded, push-pull and snap-lock or similar device
LFO provides Single-mode, Multi-mode, Angle-polished Fiber Connector assemblies with stable qualities that use high quality Ceramic Ferrules. We offer an array of Fiber Connector kits and Fiber Adapters for FC, SC,ST, LC, and MU configurations
http://www.twfiberoptic.com
Photo:
http://www.prlog.org/
