Dell Inspiron 1420 AC Adapter, Dell AC Adapter, Inspiron 1420 adapter
Dell Inspiron 1420 AC Adapter 19.5V 3.34A Features/Specifications :
Input: AC100-240V (worldwide use)
Output: DC19.5V 3.34A
Power: 65W
Connecter size:
Internal Diameter: 5.0mm
External Diameter: 7.4mm
With central pin inside
Item Includes: Dell Inspiron 1420 AC Adapter and Power Cord.
Brand New Replacement Product, works as genuine parts, 100% OEM Compatible!!
Full 12 months warranty!!
Dell Inspiron 1420 AC Adapter Fit Laptop Model :
Inspiron:
300M, 500M, 505M, 600M, 630M, 640M, 700M, 710M, 1401, 1410, 1420, 1501, 1520, 1521, 1525, 6000, 6400, E1405, E1505,
Latitude:
120L, 131L, D400, D410, D420, D430, D500, D505, D510, D520, D530, D531, D531N, D600, D610, D620, D630, D630N, D631N, D800, D810, D830, D830N, X300, E4300
Precision:
M20 M70,
XPS:
M140, M1210
Vostro:
1000, 1400, A840, A860
Dell Inspiron 1420 AC Adapter Fit Laptop Part :
9T215, NADP-90KB, PA-12,00001, 310-2860, 310-3149, 310-4408, 310-7251, 310-7696, 310-7697, 310-7866, 310-8363, 310-8941, 310-9048, 310-9050, 310-9249, 310-9438, 310-9439, 5U092, DF263, F7970, HF991, MK911, N2765, N2768, NF642, pa12, Pa-12, PA-1650-050,PC531, XD733, XD802, YR733,0F7970
If you are experienced enough to do such repairs, following the suggestions below will assist you in repairing the power jack on a Dell laptop.
1. Remove the wire from both the laptop and the outlet.
2. Cut the wire at any point beyond the damaged area so that you can make a clean cut. It is best to leave at least a few millimeters between the damaged area and the cut to ensure that there is no damage to the wires you are going to reconnect.
3. Desolder the power jack from your motherboard that you have already taken out from the laptop. Both the motherboard and the Dell Inspiron 1420 AC Adapter jack have to be cleaned properly and then soldered again.
4. Carefully start to cut the outer plastic of both ends of the cut wire about a centimeter from the end. Do this gently as you do not want to cut the wires wrapped around the inner insulation. Remove the excess plastic.
5. Move the wrapped wires out of the way, and gently cut the inner insulating plastic only a few millimeters from the end. You will only need a tiny bit of exposed cord for this inner wire.
6. Hold the Dell ac adapter power jack and carefully remove from the motherboard. When the power jack is successfully removed, clean the oxidized contacts with a sharp metal object. Apply a coat of solder to the contacts. Clean the Dell Inspiron 1420 AC Adapter jack, and place the solders to all sides of the motherboard.
7. Secure the entire connection with a complete wrap of electrical tape, and test your connection.
See more information on: http://www.usadapter.com/
Photo:
http://www.prlog.org/
